List of Open Source Software which can be built on Fugaku

Spack logo
Spack will be used to manage open source software packages on Fugaku. Fugaku users can easily use pre-installed packages and built packages based on Spack recipes. The following list shows the results of building/compiling packages for aarch64 according to the Spack recipes. Note that the results in this list do not guarantee that each package will work properly. On the other hand, Fujitsu will provide the following packages compiled with Fujitsu compiler on Fugaku as "external" packages, of which Spack can be aware.
  • OpenJDK 11
  • Ruby 2.6.5 or later
  • Python2 2.7.15
  • Python3 3.6.8
  • Numpy 1.14.3
  • SciPy 1.0.0
  • Eclipse IDE 2019-09 R Packages
Please contact us from email:

apex 2.4.1

Compiler Fujitsu Compiler 4.7.0
Result Dependency Error

Failed Reason

Failed to install dependency package :
------------------------------------------------
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/activeharmony-4.6.0-ktjz5qtttbv2tzheiexxhsw6apbeupaf
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/gnuconfig-2021-08-14-ezyvb3gy7i726n45kwb44a4vxle3if3i
[+] /usr (external gettext-0.19.8.1-seu57rrlbvdvq4fllw4fy75gelcj4jsh)
[+] /usr (external zlib-1.2.11-o3hvygtdcp6vg3bpvsrurq4hgklwtype)
[+] /usr (external ncurses-6.1-qbvus6vwvtyxe33hxq4hbpazkrpy6ctb)
==> Installing papi-6.0.0.1-dwhlg76xcmqk27g7ziyxuuhaq3rxhofu
==> No binary for papi-6.0.0.1-dwhlg76xcmqk27g7ziyxuuhaq3rxhofu found: installing from source
==> Fetching https://mirror.spack.io/_source-cache/archive/3c/3cd7ed50c65b0d21d66e46d0ba34cd171178af4bbf9d94e693915c1aca1e287f.tar.gz
==> No patches needed for papi
==> papi: Executing phase: 'autoreconf'
==> papi: Executing phase: 'configure'
==> papi: Executing phase: 'build'
==> papi: Executing phase: 'install'
==> papi: Successfully installed papi-6.0.0.1-dwhlg76xcmqk27g7ziyxuuhaq3rxhofu
Fetch: 1.37s. Build: 10m 40.78s. Total: 10m 42.15s.
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/papi-6.0.0.1-dwhlg76xcmqk27g7ziyxuuhaq3rxhofu
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/libiconv-1.16-53uyda5tbc4cft2ipchbsft56qsivt74
==> Installing otf2-2.3-l3ofjm452wdwc35db3vxtfzh62ld2sjm
==> No binary for otf2-2.3-l3ofjm452wdwc35db3vxtfzh62ld2sjm found: installing from source
==> Fetching https://mirror.spack.io/_source-cache/archive/36/36957428d37c40d35b6b45208f050fb5cfe23c54e874189778a24b0e9219c7e3.tar.gz
==> No patches needed for otf2
==> otf2: Executing phase: 'autoreconf'
==> otf2: Executing phase: 'configure'
==> otf2: Executing phase: 'build'
==> otf2: Executing phase: 'install'
==> otf2: Successfully installed otf2-2.3-l3ofjm452wdwc35db3vxtfzh62ld2sjm
Fetch: 1.39s. Build: 4m 14.12s. Total: 4m 15.51s.
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/otf2-2.3-l3ofjm452wdwc35db3vxtfzh62ld2sjm
==> Installing libunwind-1.5.0-ajm6mzaiudny6lepolujkbg7bjdabtyv
==> No binary for libunwind-1.5.0-ajm6mzaiudny6lepolujkbg7bjdabtyv found: installing from source
==> Fetching https://mirror.spack.io/_source-cache/archive/90/90337653d92d4a13de590781371c604f9031cdb50520366aa1e3a91e1efb1017.tar.gz
==> No patches needed for libunwind
==> libunwind: Executing phase: 'autoreconf'
==> libunwind: Executing phase: 'configure'
==> libunwind: Executing phase: 'build'
==> libunwind: Executing phase: 'install'
==> libunwind: Successfully installed libunwind-1.5.0-ajm6mzaiudny6lepolujkbg7bjdabtyv
Fetch: 0.24s. Build: 9m 25.86s. Total: 9m 26.10s.
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/libunwind-1.5.0-ajm6mzaiudny6lepolujkbg7bjdabtyv
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/cmake-3.21.4-vgsk3aw6j4szlnkzjz3u57u7qtoosnkz
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/diffutils-3.8-c3z2qrsurl5l57yct4kuz2mxjyjywwgz
==> Installing gperftools-2.9.1-kz7yl4kmp53rmg7rlbsq6nytn3zlhgp4
==> No binary for gperftools-2.9.1-kz7yl4kmp53rmg7rlbsq6nytn3zlhgp4 found: installing from source
==> Fetching https://mirror.spack.io/_source-cache/archive/ea/ea566e528605befb830671e359118c2da718f721c27225cbbc93858c7520fee3.tar.gz
==> No patches needed for gperftools
==> gperftools: Executing phase: 'autoreconf'
==> gperftools: Executing phase: 'configure'
==> gperftools: Executing phase: 'build'
==> gperftools: Executing phase: 'install'
==> gperftools: Successfully installed gperftools-2.9.1-kz7yl4kmp53rmg7rlbsq6nytn3zlhgp4
Fetch: 1.19s. Build: 11m 52.85s. Total: 11m 54.04s.
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/gperftools-2.9.1-kz7yl4kmp53rmg7rlbsq6nytn3zlhgp4
==> Installing binutils-2.37-sht6juw4nqcma3rxcv3ccpoxesd6bqsk
==> No binary for binutils-2.37-sht6juw4nqcma3rxcv3ccpoxesd6bqsk found: installing from source
==> Fetching https://mirror.spack.io/_source-cache/archive/67/67fc1a4030d08ee877a4867d3dcab35828148f87e1fd05da6db585ed5a166bd4.tar.bz2
==> No patches needed for binutils
==> binutils: Executing phase: 'autoreconf'
==> binutils: Executing phase: 'configure'
==> Error: ProcessError: Command exited with status 77:
'/home/rccs-sdt/a01008/spack-stage/spack-stage-binutils-2.37-sht6juw4nqcma3rxcv3ccpoxesd6bqsk/spack-src/configure' '--prefix=/vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/binutils-2.37-sht6juw4nqcma3rxcv3ccpoxesd6bqsk' '--disable-dependency-tracking' '--disable-werror' '--enable-multilib' '--enable-64-bit-bfd' '--enable-targets=all' '--with-system-zlib' '--with-sysroot=/' '--enable-shared' '--enable-static' '--disable-lto' '--disable-ld' '--disable-gas' '--disable-interwork' '--disable-gold' '--enable-plugins' '--enable-install-libiberty' '--enable-nls'

2 errors found in build log:
9 checking whether ln -s works... yes
10 checking for a sed that does not truncate output... /usr/bin/sed
11 checking for gawk... gawk
12 configure: WARNING: neither ld nor gold are enabled
13 checking for gcc... /vol0003/rccs-sdt/a01008/spack-all-test/env-2022
0225/spack/lib/spack/env/fj/fcc
14 checking whether the C compiler works... no
>> 15 configure: error: in `/vol0003/rccs-sdt/a01008/spack-stage/spack-sta
ge-binutils-2.37-sht6juw4nqcma3rxcv3ccpoxesd6bqsk/spack-src':
>> 16 configure: error: C compiler cannot create executables
17 See `config.log' for more details

See build log for details:
/home/rccs-sdt/a01008/spack-stage/spack-stage-binutils-2.37-sht6juw4nqcma3rxcv3ccpoxesd6bqsk/spack-build-out.txt

==> Warning: Skipping build of apex-2.4.1-77udakwqtrecbvisfaqhztleiqs7hysg since binutils-2.37-sht6juw4nqcma3rxcv3ccpoxesd6bqsk failed
==> Error: apex-2.4.1-77udakwqtrecbvisfaqhztleiqs7hysg: Package was not installed
==> Error: Installation request failed. Refer to reported errors for failing package(s).


<= Back to list