List of Open Source Software which can be built on Fugaku

Spack logo
Spack will be used to manage open source software packages on Fugaku. Fugaku users can easily use pre-installed packages and built packages based on Spack recipes. The following list shows the results of building/compiling packages for aarch64 according to the Spack recipes. Note that the results in this list do not guarantee that each package will work properly. On the other hand, Fujitsu will provide the following packages compiled with Fujitsu compiler on Fugaku as "external" packages, of which Spack can be aware.
  • OpenJDK 11
  • Ruby 2.6.5 or later
  • Python2 2.7.15
  • Python3 3.6.8
  • Numpy 1.14.3
  • SciPy 1.0.0
  • Eclipse IDE 2019-09 R Packages
Please contact us from email:

libnrm 0.1.0

Compiler Fujitsu Compiler 4.7.0
Result Dependency Error

Failed Reason

Failed to install dependency package :
------------------------------------------------
[+] /usr (external autoconf-2.69-me3qacnq6as2fvkhuiia2ks5udajax3b)
[+] /usr (external automake-1.16.1-gbketv7wv244mk5mkf65hyjxew4yocxo)
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/gnuconfig-2021-08-14-ezyvb3gy7i726n45kwb44a4vxle3if3i
[+] /usr (external libtool-2.4.6-snb3wjzerg4q7w57akrhqlg2hfvalawy)
[+] /usr (external pkgconf-1.4.2-x2r3t6jrikcoqgyvulfa2xm3cgearc2z)
[+] /usr (external m4-1.4.18-zz6lq3qkexluljpiw5yxqyozzhkijvpn)
[+] /usr (external hwloc-2.2.0-rmis2olps5il7dl7dva6guws6hdyyqjt)
[+] /usr (external libxml2-2.9.7-sjfhie7egvrddyaxgsplnop3zfbkkssb)
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/libfabric-1.13.2-5maego6i3dsrgfqlulwav5zegz6crrun
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/libsodium-1.0.18-ufbjhyel5wmxfvkf3enwuqewx7uqx2cq
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/findutils-4.8.0-hbp3a5kijvggip2hu6cjjjtqnruxmh76
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/util-macros-1.19.3-xcqo73bn3nuqaorzcxbwe7gryrrs3tdi
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/libmd-1.0.3-stbabcescctoosfu2nwuv5cekryi4p4g
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/libpciaccess-0.16-74y6xqt47lwnpy66keok3cwv4lm2x45a
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/libbsd-0.11.3-xiejcn74x7lxnfv2gl3k2zsohzdun57v
==> Installing mpich-3.4.2-75ydgfalgd3sy47qgzgr5jwjli7fijos
==> No binary for mpich-3.4.2-75ydgfalgd3sy47qgzgr5jwjli7fijos found: installing from source
==> Fetching https://mirror.spack.io/_source-cache/archive/5c/5c19bea8b84e8d74cca5f047e82b147ff3fba096144270e3911ad623d6c587bf.tar.gz
==> No patches needed for mpich
==> mpich: Executing phase: 'autoreconf'
==> mpich: Executing phase: 'configure'
==> mpich: Executing phase: 'build'
==> Error: ProcessError: Command exited with status 2:
'make' '-j16' 'V=1'

1 error found in build log:
10498 ( cd /home/rccs-sdt/a01008/spack-stage/spack-stage-mpich-3.4.2-75
ydgfalgd3sy47qgzgr5jwjli7fijos/spack-src/src/binding/fortran/use_
mpi && ./buildiface )
10499 Replacing mpi_base.f90.in
10500 Replacing mpi_constants.f90.in
10501 Replacing mpi_t1.f90
10502 CDPATH="${ZSH_VERSION+.}:" && cd /home/rccs-sdt/a01008/spack-stag
e/spack-stage-mpich-3.4.2-75ydgfalgd3sy47qgzgr5jwjli7fijos/spack-
src && /bin/sh /vol0003/rccs-sdt/a01008/spack-stage/spack-stage-m
pich-3.4.2-75ydgfalgd3sy47qgzgr5jwjli7fijos/spack-src/confdb/miss
ing aclocal-1.15 -I confdb -I modules/hwloc/config
10503 /vol0003/rccs-sdt/a01008/spack-stage/spack-stage-mpich-3.4.2-75yd
gfalgd3sy47qgzgr5jwjli7fijos/spack-src/confdb/missing: line 81: a
clocal-1.15: command not found
>> 10504 WARNING: 'aclocal-1.15' is missing on your system.
10505 You should only need it if you modified 'acinclude.m4' o
r
10506 'configure.ac' or m4 files included by 'configure.ac'.
10507 The 'aclocal' program is part of the GNU Automake packag
e:
10508 <http://www.gnu.org/software/automake>
10509 It also requires GNU Autoconf, GNU m4 and Perl in order
to run:
10510 <http://www.gnu.org/software/autoconf>

See build log for details:
/home/rccs-sdt/a01008/spack-stage/spack-stage-mpich-3.4.2-75ydgfalgd3sy47qgzgr5jwjli7fijos/spack-build-out.txt

==> Warning: Skipping build of libnrm-0.1.0-xrrfhoj2mst6uwtmgx7p6eskwz7ulcru since mpich-3.4.2-75ydgfalgd3sy47qgzgr5jwjli7fijos failed
==> Error: libnrm-0.1.0-xrrfhoj2mst6uwtmgx7p6eskwz7ulcru: Package was not installed
==> Error: Installation request failed. Refer to reported errors for failing package(s).
[+] /vol0003/rccs-sdt/a01008/spack-all-test/env-20220225/spack/opt/spack/linux-rhel8-a64fx/fj-4.7.0/libzmq-4.3.3-koybfeuaxei43dv32zqorzb2lso6acwi


<= Back to list