Failed Reason

Failed to install dependency package :
------------------------------------------------
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/1b/1b1bcdf91221e78c6c33738667a57bd9aaa63d5953174ad8ed9929296741c9f5.tar.gz
==> No patches needed for xextproto
==> xextproto: Executing phase: 'autoreconf'
==> xextproto: Executing phase: 'configure'
==> xextproto: Executing phase: 'build'
==> xextproto: Executing phase: 'install'
==> xextproto: Successfully installed xextproto-7.3.0-fqunm4iuoxftyzupwdqwbvlogutsvgjc
Stage: 1m 16.17s. Autoreconf: 30.54s. Configure: 3m 3.34s. Build: 0.14s. Install: 1.82s. Post-install: 1.33s. Total: 4m 54.18s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/xextproto-7.3.0-fqunm4iuoxftyzupwdqwbvlogutsvgjc
==> Installing mesa-glu-9.0.2-ak6wodkone3mqg2v3onyzu3wh6g46536 [40/53]
==> No binary for mesa-glu-9.0.2-ak6wodkone3mqg2v3onyzu3wh6g46536 found: installing from source
patch unexpectedly ends in middle of line
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/24/24effdfb952453cc00e275e1c82ca9787506aba0282145fff054498e60e19a65.tar.gz
==> Applied patch /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/repos/builtin/packages/mesa-glu/register-long.patch
==> mesa-glu: Executing phase: 'autoreconf'
==> mesa-glu: Executing phase: 'configure'
==> Error: ProcessError: Command exited with status 1:
'/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-mesa-glu-9.0.2-ak6wodkone3mqg2v3onyzu3wh6g46536/spack-src/configure' '--prefix=/vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/mesa-glu-9.0.2-ak6wodkone3mqg2v3onyzu3wh6g46536' '--disable-libglvnd' '--disable-osmesa'

1 error found in build log:
109 checking for pkg-config... /usr/bin/pkg-config
110 checking pkg-config is at least version 0.9.0... yes
111 checking for GL... no
112 checking GL/gl.h usability... no
113 checking GL/gl.h presence... no
114 checking for GL/gl.h... no
>> 115 configure: error: GL not found

See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-mesa-glu-9.0.2-ak6wodkone3mqg2v3onyzu3wh6g46536/spack-build-out.txt

==> Warning: Skipping build of freeglut-3.2.2-dsfznfyjbauepj55jr2el5bknazjywg2 since mesa-glu-9.0.2-ak6wodkone3mqg2v3onyzu3wh6g46536 failed
==> Warning: Skipping build of 3dtk-trunk-6zi6ah3uoja4jjm7nxpqlbatkpre2tqa since freeglut-3.2.2-dsfznfyjbauepj55jr2el5bknazjywg2 failed
==> Installing mpfr-4.2.0-xgnqg2zix5lb3bnfego7iurj4xxqijr7 [41/53]
==> No binary for mpfr-4.2.0-xgnqg2zix5lb3bnfego7iurj4xxqijr7 found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/69/691db39178e36fc460c046591e4b0f2a52c8f2b3ee6d750cc2eab25f1eaa999d.tar.bz2
==> No patches needed for mpfr
==> mpfr: Executing phase: 'autoreconf'
==> mpfr: Executing phase: 'configure'
==> mpfr: Executing phase: 'build'
==> mpfr: Executing phase: 'install'
==> mpfr: Successfully installed mpfr-4.2.0-xgnqg2zix5lb3bnfego7iurj4xxqijr7
Stage: 19.43s. Autoreconf: 2m 47.66s. Configure: 7m 43.53s. Build: 9m 47.30s. Install: 5.27s. Post-install: 1.32s. Total: 20m 46.09s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/mpfr-4.2.0-xgnqg2zix5lb3bnfego7iurj4xxqijr7
==> Installing metis-5.1.0-6d55bzb64ehuzmkjpsj7dpvuf4pdrfri [42/53]
==> No binary for metis-5.1.0-6d55bzb64ehuzmkjpsj7dpvuf4pdrfri found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/76/76faebe03f6c963127dbb73c13eab58c9a3faeae48779f049066a21c087c5db2.tar.gz
==> Applied patch /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/repos/builtin/packages/metis/gklib_path.patch
==> Applied patch /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/repos/builtin/packages/metis/install_gklib_defs_rename.patch
==> Ran patch() for metis
==> metis: Executing phase: 'cmake'
==> metis: Executing phase: 'build'
==> metis: Executing phase: 'install'
==> metis: Successfully installed metis-5.1.0-6d55bzb64ehuzmkjpsj7dpvuf4pdrfri
Stage: 6.04s. Cmake: 18.19s. Build: 1m 40.31s. Install: 6.24s. Post-install: 1.48s. Total: 2m 14.28s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/metis-5.1.0-6d55bzb64ehuzmkjpsj7dpvuf4pdrfri
==> Installing eigen-3.4.0-wjuohc32eoiw6gf3a4l5ro6s57pjqrrz [43/53]
==> No binary for eigen-3.4.0-wjuohc32eoiw6gf3a4l5ro6s57pjqrrz found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/85/8586084f71f9bde545ee7fa6d00288b264a2b7ac3607b974e54d13e7162c1c72.tar.gz
==> No patches needed for eigen
==> eigen: Executing phase: 'cmake'
==> eigen: Executing phase: 'build'
==> eigen: Executing phase: 'install'
==> eigen: Successfully installed eigen-3.4.0-wjuohc32eoiw6gf3a4l5ro6s57pjqrrz
Stage: 45.80s. Cmake: 9m 36.08s. Build: 1.85s. Install: 34.48s. Post-install: 7.64s. Total: 11m 7.45s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/eigen-3.4.0-wjuohc32eoiw6gf3a4l5ro6s57pjqrrz
==> Installing opencv-4.8.0-uaovm7epcbzfpojc5cftulkehhj2fvyn [44/53]
==> No binary for opencv-4.8.0-uaovm7epcbzfpojc5cftulkehhj2fvyn found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/cb/cbf47ecc336d2bff36b0dcd7d6c179a9bb59e805136af6b9670ca944aef889bd.tar.gz
==> Moving resource stage
source: /data/rccs-sdt/a01008/tmpdir/spack-stage/resource-contrib-uaovm7epcbzfpojc5cftulkehhj2fvyn/spack-src/
destination: /data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-opencv-4.8.0-uaovm7epcbzfpojc5cftulkehhj2fvyn/spack-src/opencv_contrib
==> Applied patch /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/repos/builtin/packages/opencv/cmake_no-system-paths.patch
==> Applied patch /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/repos/builtin/packages/opencv/opencv4.1.1_clp_cmake.patch
==> opencv: Executing phase: 'cmake'
==> opencv: Executing phase: 'build'
==> opencv: Executing phase: 'install'
==> opencv: Successfully installed opencv-4.8.0-uaovm7epcbzfpojc5cftulkehhj2fvyn
Stage: 9m 17.12s. Cmake: 4m 0.24s. Build: 9m 20.95s. Install: 25.63s. Post-install: 5.54s. Total: 23m 12.72s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/opencv-4.8.0-uaovm7epcbzfpojc5cftulkehhj2fvyn
==> Installing libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrkltevg [45/53]
==> No binary for libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrkltevg found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/ef/efd3a3a43c1f177edc2c205bedb0719b6648203595e54c0b83a32576aeaca7cd.tar.gz
==> No patches needed for libx11
==> libx11: Executing phase: 'autoreconf'
==> libx11: Executing phase: 'configure'
==> libx11: Executing phase: 'build'
==> Error: ProcessError: Command exited with status 2:
'make' '-j16' 'V=1'

4 errors found in build log:
3073 Making all in nls
3074 make[1]: Entering directory '/vol0003/rccs-sdt/data/a01008/tmpdir/
spack-stage/spack-stage-libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrklt
evg/spack-src/nls'
3075 cd .. && make am--refresh
3076 make[2]: Entering directory '/vol0003/rccs-sdt/data/a01008/tmpdir/
spack-stage/spack-stage-libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrklt
evg/spack-src'
3077 CDPATH="${ZSH_VERSION+.}:" && cd /data/rccs-sdt/a01008/tmpdir/spac
k-stage/spack-stage-libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrkltevg/
spack-src && /bin/sh /data/rccs-sdt/a01008/tmpdir/spack-stage/spac
k-stage-libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrkltevg/spack-src/mi
ssing aclocal-1.15 -I m4
3078 /data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-libx11-1.8.4-
uwfs4whz7y6cxrmbfriae5rjsrkltevg/spack-src/missing: line 81: acloc
al-1.15: command not found
>> 3079 WARNING: 'aclocal-1.15' is missing on your system.
3080 You should only need it if you modified 'acinclude.m4' or
3081 'configure.ac' or m4 files included by 'configure.ac'.
3082 The 'aclocal' program is part of the GNU Automake package
:
3083 <http://www.gnu.org/software/automake>
3084 It also requires GNU Autoconf, GNU m4 and Perl in order t
o run:
3085 <http://www.gnu.org/software/autoconf>
3086 <http://www.gnu.org/software/m4/>
3087 <http://www.perl.org/>
>> 3088 make[2]: *** [Makefile:468: /data/rccs-sdt/a01008/tmpdir/spack-sta
ge/spack-stage-libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrkltevg/spack
-src/aclocal.m4] Error 127
3089 make[2]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/s
pack-stage/spack-stage-libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrklte
vg/spack-src'
>> 3090 make[1]: *** [Makefile:589: /data/rccs-sdt/a01008/tmpdir/spack-sta
ge/spack-stage-libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrkltevg/spack
-src/aclocal.m4] Error 2
3091 make[1]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/s
pack-stage/spack-stage-libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrklte
vg/spack-src/nls'
>> 3092 make: *** [Makefile:523: all-recursive] Error 1

See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrkltevg/spack-build-out.txt

==> Warning: Skipping build of libxi-1.7.6-6jgkop7bihrxzlpwkh2zybkrcpripnq4 since libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrkltevg failed
==> Warning: Skipping build of libxfixes-5.0.2-lqbuv4a2wcbbf6uzhpeaazbohmbmgyvy since libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrkltevg failed
==> Warning: Skipping build of libxext-1.3.3-uw36ft66btmhuje5wqpuvumdkjaliblr since libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrkltevg failed
==> Warning: Skipping build of libxxf86vm-1.1.4-nlw4ylh66u7j5gsm2peahlb2mb7mrqev since libxext-1.3.3-uw36ft66btmhuje5wqpuvumdkjaliblr failed
==> Warning: Skipping build of glew-2.2.0-5bakhvnspvmbtntqw6xkfepcoq6lga7j since libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrkltevg failed
==> Installing suite-sparse-5.13.0-atp4gqcc4kr3awlxcegphe7nlslai4qz [46/53]
==> No binary for suite-sparse-5.13.0-atp4gqcc4kr3awlxcegphe7nlslai4qz found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/59/59c6ca2959623f0c69226cf9afb9a018d12a37fab3a8869db5f6d7f83b6b147d.tar.gz
==> No patches needed for suite-sparse
==> suite-sparse: Executing phase: 'install'
==> suite-sparse: Successfully installed suite-sparse-5.13.0-atp4gqcc4kr3awlxcegphe7nlslai4qz
Stage: 6m 52.00s. Install: 13m 36.18s. Post-install: 2.82s. Total: 20m 33.98s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/suite-sparse-5.13.0-atp4gqcc4kr3awlxcegphe7nlslai4qz
==> Error: 3dtk-trunk-6zi6ah3uoja4jjm7nxpqlbatkpre2tqa: Package was not installed
==> Error: Installation request failed. Refer to reported errors for failing package(s).