Failed Reason

Failed to install dependency package :
------------------------------------------------
==> Warning: config:terminal_title has been replaced by install_status and is ignored
==> Warning: Failed to initialize repository: '$spack/var/spack/repos/local'.
No repo.yaml found in '$spack/var/spack/repos/local'
To remove the bad repository, run this command:
spack repo rm $spack/var/spack/repos/local
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/activeharmony-4.6.0-jdwwic22jup2powg5545uv6zi42optw7
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libiconv-1.17-nh4rfr3f3pcowrx2xcn2l45yyfy3xzk6
[+] /usr (external gmake-4.2.1-eszqmok6vi6wxcmklx6bqloeidbh25kb)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/gnuconfig-2022-09-17-w33oejhx46ex2iql4orzjqdmt2kdqdb2
[+] /usr (external pkgconf-1.4.2-mmjuloqcob6vnd6bylwgum67waaa3kht)
[+] /usr (external curl-7.61.1-qsvgylcys5hkzdnl2pdh4blrprxlsp5m)
[+] /usr (external ncurses-6.1-a6lc7oq2dlgphtibbpp6x72mqgmscros)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/zstd-1.5.5-o7dcxyae4kjgruht44yuloa27ddisxfe
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/diffutils-3.9-hmkvpwjohgjqi6ub54fcbanq34gnrqvd
==> Installing libunwind-1.6.2-nltxsxcamez2cg7hsbzoonshiiqsld2e [10/17]
==> No binary for libunwind-1.6.2-nltxsxcamez2cg7hsbzoonshiiqsld2e found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/4a/4a6aec666991fb45d0889c44aede8ad6eb108071c3554fcdff671f9c94794976.tar.gz
==> No patches needed for libunwind
==> libunwind: Executing phase: 'autoreconf'
==> libunwind: Executing phase: 'configure'
==> libunwind: Executing phase: 'build'
==> libunwind: Executing phase: 'install'
==> libunwind: Successfully installed libunwind-1.6.2-nltxsxcamez2cg7hsbzoonshiiqsld2e
Stage: 21.76s. Autoreconf: 15.97s. Configure: 3m 32.22s. Build: 3m 37.97s. Install: 7.71s. Post-install: 1.22s. Total: 7m 57.72s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libunwind-1.6.2-nltxsxcamez2cg7hsbzoonshiiqsld2e
==> Installing papi-6.0.0.1-sksengmwdalrvx3x7o4lbligcurxwdun [11/17]
==> No binary for papi-6.0.0.1-sksengmwdalrvx3x7o4lbligcurxwdun found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/3c/3cd7ed50c65b0d21d66e46d0ba34cd171178af4bbf9d94e693915c1aca1e287f.tar.gz
==> No patches needed for papi
==> papi: Executing phase: 'autoreconf'
==> papi: Executing phase: 'configure'
==> papi: Executing phase: 'build'
==> papi: Executing phase: 'install'
==> papi: Successfully installed papi-6.0.0.1-sksengmwdalrvx3x7o4lbligcurxwdun
Stage: 59.25s. Autoreconf: 1.85s. Configure: 3m 49.20s. Build: 6m 13.79s. Install: 7.89s. Post-install: 3.81s. Total: 11m 16.89s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/papi-6.0.0.1-sksengmwdalrvx3x7o4lbligcurxwdun
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/zlib-ng-2.1.4-m4nsqgrityww4eqljits3svzi4wynus3
==> Installing otf2-3.0-4o65jkw3avk6i3xkozdnf365lt6hib7g [13/17]
==> No binary for otf2-3.0-4o65jkw3avk6i3xkozdnf365lt6hib7g found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/6f/6fff0728761556e805b140fd464402ced394a3c622ededdb618025e6cdaa6d8c.tar.gz
==> Applied patch /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/repos/builtin/packages/otf2/collective_callbacks.patch
==> otf2: Executing phase: 'autoreconf'
==> otf2: Executing phase: 'configure'
==> otf2: Executing phase: 'build'
==> otf2: Executing phase: 'install'
==> otf2: Successfully installed otf2-3.0-4o65jkw3avk6i3xkozdnf365lt6hib7g
Stage: 26.23s. Autoreconf: 1.43s. Configure: 2m 27.78s. Build: 1m 57.40s. Install: 20.32s. Post-install: 10.23s. Total: 5m 24.38s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/otf2-3.0-4o65jkw3avk6i3xkozdnf365lt6hib7g
==> Installing gperftools-2.13-ozjdp3vxin25yjxxb7lopl5pngfxsqjh [14/17]
==> No binary for gperftools-2.13-ozjdp3vxin25yjxxb7lopl5pngfxsqjh found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/48/4882c5ece69f8691e51ffd6486df7d79dbf43b0c909d84d3c0883e30d27323e7.tar.gz
==> No patches needed for gperftools
==> gperftools: Executing phase: 'autoreconf'
==> gperftools: Executing phase: 'configure'
==> gperftools: Executing phase: 'build'
==> gperftools: Executing phase: 'install'
==> gperftools: Successfully installed gperftools-2.13-ozjdp3vxin25yjxxb7lopl5pngfxsqjh
Stage: 9.05s. Autoreconf: 0.98s. Configure: 1m 51.60s. Build: 10m 31.53s. Install: 10.49s. Post-install: 2.56s. Total: 12m 47.31s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/gperftools-2.13-ozjdp3vxin25yjxxb7lopl5pngfxsqjh
==> Installing binutils-2.41-yvyfrjbao2wscnqf2yajuhecuiogw2dy [15/17]
==> No binary for binutils-2.41-yvyfrjbao2wscnqf2yajuhecuiogw2dy found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/a4/a4c4bec052f7b8370024e60389e194377f3f48b56618418ea51067f67aaab30b.tar.bz2
==> No patches needed for binutils
==> binutils: Executing phase: 'autoreconf'
==> binutils: Executing phase: 'configure'
==> binutils: Executing phase: 'build'
==> Error: ProcessError: Command exited with status 2:
'make' '-j16' 'V=1'

5 errors found in build log:
2024 else \
2025 rc=$?; \
2026 $restore $backupdir/* `echo "./doc/bfd.info" | sed 's|[^/]*$||'`
; \
2027 fi; \
2028 rm -rf $backupdir; exit $rc
2029 /data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-binutils-2.41
-yvyfrjbao2wscnqf2yajuhecuiogw2dy/spack-src/missing: line 81: make
info: command not found
>> 2030 WARNING: 'makeinfo' is missing on your system.
2031 You should only need it if you modified a '.texi' file, o
r
2032 any other file indirectly affecting the aspect of the man
ual.
2033 You might want to install the Texinfo package:
2034 <http://www.gnu.org/software/texinfo/>
2035 The spurious makeinfo call might also be the consequence
of
2036 using a buggy 'make' (AIX, DU, IRIX), in which case you m
ight
2037 want to install GNU make:
2038 <http://www.gnu.org/software/make/>
>> 2039 make[3]: *** [Makefile:1764: doc/bfd.info] Error 127
2040 make[3]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/s
pack-stage/spack-stage-binutils-2.41-yvyfrjbao2wscnqf2yajuhecuiogw
2dy/spack-src/bfd'
>> 2041 make[2]: *** [Makefile:1924: info-recursive] Error 1
2042 make[2]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/s
pack-stage/spack-stage-binutils-2.41-yvyfrjbao2wscnqf2yajuhecuiogw
2dy/spack-src/bfd'
>> 2043 make[1]: *** [Makefile:3074: all-bfd] Error 2
2044 make[1]: *** Waiting for unfinished jobs....
2045 o
2046 checking whether we are using the GNU C compiler... yes
2047 checking whether /vol0003/rccs-sdt/data/a01008/spack-all-test/env-
20240227/spack/lib/spack/env/fj/fcc accepts -g... yes
2048 checking for /vol0003/rccs-sdt/data/a01008/spack-all-test/env-2024
0227/spack/lib/spack/env/fj/fcc option to accept ISO C89... none n
eeded
2049 checking whether /vol0003/rccs-sdt/data/a01008/spack-all-test/env-
20240227/spack/lib/spack/env/fj/fcc understands -c and -o together
... yes

...

2128 config.status: executing depfiles commands
2129 config.status: executing libtool commands
2130 config.status: executing default-1 commands
2131 config.status: creating po/POTFILES
2132 config.status: creating po/Makefile
2133 make[1]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/s
pack-stage/spack-stage-binutils-2.41-yvyfrjbao2wscnqf2yajuhecuiogw
2dy/spack-src'
>> 2134 make: *** [Makefile:1005: all] Error 2

See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-binutils-2.41-yvyfrjbao2wscnqf2yajuhecuiogw2dy/spack-build-out.txt

==> Warning: Skipping build of apex-2.6.3-ut7akom3gdjhpysk3y3feqnt7fz5psuo since binutils-2.41-yvyfrjbao2wscnqf2yajuhecuiogw2dy failed
==> Error: apex-2.6.3-ut7akom3gdjhpysk3y3feqnt7fz5psuo: Package was not installed
==> Error: Installation request failed. Refer to reported errors for failing package(s).
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/cmake-3.27.7-ussgjuqkqbxi5dcv7kbp6bugdcjc5ph6