List of Open Source Software which can be built on Fugaku

Spack logo
Spack will be used to manage open source software packages on Fugaku. Fugaku users can easily use pre-installed packages and built packages based on Spack recipes. The following list shows the results of building/compiling packages for aarch64 according to the Spack recipes. Note that the results in this list do not guarantee that each package will work properly. On the other hand, Fujitsu will provide the following packages compiled with Fujitsu compiler on Fugaku as "external" packages, of which Spack can be aware.
  • OpenJDK 11
  • Ruby 2.6.5 or later
  • Python2 2.7.15
  • Python3 3.6.8
  • Numpy 1.14.3
  • SciPy 1.0.0
  • Eclipse IDE 2019-09 R Packages
Please contact us from email:

audit-userspace 3.1.1

Compiler Fujitsu Compiler Fujitsu C/C++ Compiler 4.10.0 tcsds-1.2.38
Result Dependency Error

Failed Reason

Failed to install dependency package :
------------------------------------------------
==> Warning: config:terminal_title has been replaced by install_status and is ignored
==> Warning: Failed to initialize repository: '$spack/var/spack/repos/local'.
No repo.yaml found in '$spack/var/spack/repos/local'
To remove the bad repository, run this command:
spack repo rm $spack/var/spack/repos/local
[+] /usr (external autoconf-2.69-titfazaulrbnqxmahzxzof53lmsnabip)
[+] /usr (external automake-1.16.1-fryterkxezzfuo7itm4kijqfnazo5uk4)
[+] /usr (external gmake-4.2.1-eszqmok6vi6wxcmklx6bqloeidbh25kb)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/gnuconfig-2022-09-17-w33oejhx46ex2iql4orzjqdmt2kdqdb2
[+] /usr (external libtool-2.4.6-c63win5txkc7eap5ppbbjjoaqyj5i6wx)
[+] /usr (external m4-1.4.18-craoyd3hmfdcanz7zxglna5yxcvdtoem)
[+] /usr (external gmp-6.1.2-bdn4t2jwhvr743frsbjwrvaavy5ytp3g)
[+] /usr (external readline-7.0-e42rjj4i2akf22cltht7kf2fuxvhok62)
[+] /usr (external pkgconf-1.4.2-mmjuloqcob6vnd6bylwgum67waaa3kht)
[+] /usr (external gettext-0.19.8.1-6jl23wn6jpwquhvqibpwhvia7vxsgrq3)
[+] /usr (external ncurses-6.1-a6lc7oq2dlgphtibbpp6x72mqgmscros)
[+] /usr (external perl-5.26.3-rkgbbov2pluaat3kknhtag5ui3vltkqk)
[+] /usr (external curl-7.61.1-qsvgylcys5hkzdnl2pdh4blrprxlsp5m)
==> Installing sed-4.9-2qzuk77ra2kmmjjuro7ux3emoiv64k75 [14/28]
==> No binary for sed-4.9-2qzuk77ra2kmmjjuro7ux3emoiv64k75 found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/6e/6e226b732e1cd739464ad6862bd1a1aba42d7982922da7a53519631d24975181.tar.xz
==> No patches needed for sed
==> sed: Executing phase: 'autoreconf'
==> sed: Executing phase: 'configure'
==> sed: Executing phase: 'build'
==> sed: Executing phase: 'install'
==> sed: Successfully installed sed-4.9-2qzuk77ra2kmmjjuro7ux3emoiv64k75
Stage: 20.40s. Autoreconf: 0.69s. Configure: 6m 48.99s. Build: 1m 23.46s. Install: 8.27s. Post-install: 2.45s. Total: 8m 44.90s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/sed-4.9-2qzuk77ra2kmmjjuro7ux3emoiv64k75
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/pcre2-10.42-6kbyqamjjurixzzgishkv3abmew2p6xx
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libiconv-1.17-nh4rfr3f3pcowrx2xcn2l45yyfy3xzk6
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/zlib-ng-2.1.4-m4nsqgrityww4eqljits3svzi4wynus3
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libsigsegv-2.14-fn3bnxb7al7gn55exytmpwahs23yoofj
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/mpfr-4.2.0-xgnqg2zix5lb3bnfego7iurj4xxqijr7
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/texinfo-7.0.3-vkcp6hi7jyqa2rhdb2chqfqjpdmdk63b
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/cmake-3.27.7-ussgjuqkqbxi5dcv7kbp6bugdcjc5ph6
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/swig-4.1.1-krn47misz4rokhqg4vsn7pyz55cu625z
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/gawk-5.2.2-ljx352hziu3rixqpofzwp4fxuqlx2qhm
==> Installing uchardet-0.0.7-5rp32kpxtxavuxtdy6axd4e23wzajzo3 [24/28]
==> No binary for uchardet-0.0.7-5rp32kpxtxavuxtdy6axd4e23wzajzo3 found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/83/8351328cdfbcb2432e63938721dd781eb8c11ebc56e3a89d0f84576b96002c61.tar.xz
==> No patches needed for uchardet
==> uchardet: Executing phase: 'cmake'
==> uchardet: Executing phase: 'build'
==> uchardet: Executing phase: 'install'
==> uchardet: Successfully installed uchardet-0.0.7-5rp32kpxtxavuxtdy6axd4e23wzajzo3
Stage: 4.96s. Cmake: 8.69s. Build: 1m 2.51s. Install: 2.67s. Post-install: 0.96s. Total: 1m 20.95s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/uchardet-0.0.7-5rp32kpxtxavuxtdy6axd4e23wzajzo3
==> Installing groff-1.22.4-ozue2zm27kehovskxgkxd7iistjp346y [25/28]
==> No binary for groff-1.22.4-ozue2zm27kehovskxgkxd7iistjp346y found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/e7/e78e7b4cb7dec310849004fa88847c44701e8d133b5d4c13057d876c1bad0293.tar.gz
==> No patches needed for groff
==> groff: Executing phase: 'autoreconf'
==> groff: Executing phase: 'configure'
==> groff: Executing phase: 'build'
==> Error: ProcessError: Command exited with status 2:
'make' '-j1' 'V=1'

2 errors found in build log:
402 checking whether build environment is sane... yes
403 checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
404 checking for gawk... gawk
405 checking whether make sets $(MAKE)... yes
406 checking whether make supports the include directive... yes (GNU st
yle)
407 checking whether make supports nested variables... yes
>> 408 configure: error: source directory already configured; run "make di
stclean" there first
>> 409 make: *** [Makefile:5631: config.status] Error 1

See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-groff-1.22.4-ozue2zm27kehovskxgkxd7iistjp346y/spack-build-out.txt

==> Warning: Skipping build of openldap-2.4.49-vwecubr6moahhrwxtjx54gl2d5k4vdhk since groff-1.22.4-ozue2zm27kehovskxgkxd7iistjp346y failed
==> Warning: Skipping build of audit-userspace-3.1.1-tsdb5bnef2vxail3ddyokik4h4ldvrqs since openldap-2.4.49-vwecubr6moahhrwxtjx54gl2d5k4vdhk failed
==> Warning: Skipping build of cyrus-sasl-2.1.28-juqcum6v5gls5acywhd5akhej4djp45g since groff-1.22.4-ozue2zm27kehovskxgkxd7iistjp346y failed
==> Error: audit-userspace-3.1.1-tsdb5bnef2vxail3ddyokik4h4ldvrqs: Package was not installed
==> Error: Installation request failed. Refer to reported errors for failing package(s).


<= Back to list