Spack will be used to manage open source software packages on Fugaku.
Fugaku users can easily use pre-installed packages and built packages based on Spack recipes.
The following list shows the results of building/compiling packages for aarch64 according to the Spack recipes.
Note that the results in this list do not guarantee that each package will work properly.
On the other hand, Fujitsu will provide the following packages compiled with Fujitsu compiler on Fugaku as "external" packages, of which Spack can be aware.
![]() |
Compiler | Fujitsu Compiler Fujitsu C/C++ Compiler 4.10.0 tcsds-1.2.38 |
---|---|
Result | Dependency Error |
Failed to install dependency package :
------------------------------------------------
==> Warning: config:terminal_title has been replaced by install_status and is ignored
==> Warning: Failed to initialize repository: '$spack/var/spack/repos/local'.
No repo.yaml found in '$spack/var/spack/repos/local'
To remove the bad repository, run this command:
spack repo rm $spack/var/spack/repos/local
[+] /usr (external curl-7.61.1-qsvgylcys5hkzdnl2pdh4blrprxlsp5m)
[+] /usr (external ncurses-6.1-a6lc7oq2dlgphtibbpp6x72mqgmscros)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/zlib-ng-2.1.4-m4nsqgrityww4eqljits3svzi4wynus3
[+] /usr (external gmake-4.2.1-eszqmok6vi6wxcmklx6bqloeidbh25kb)
[+] /usr (external perl-5.26.3-rkgbbov2pluaat3kknhtag5ui3vltkqk)
[+] /usr (external fontconfig-2.13.1-mrz2ogbin6m6xep4mbl27f5nymcez3dk)
[+] /usr (external libpng-1.6.34-xtms7s6d3iod6ac4f3fps6a5ksxtwdpa)
[+] /usr (external libxcb-1.13.1-mb3nhjwa4h4blstnlpu73gylkbxh6tuq)
[+] /usr (external pkgconf-1.4.2-mmjuloqcob6vnd6bylwgum67waaa3kht)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/cmake-3.27.7-ussgjuqkqbxi5dcv7kbp6bugdcjc5ph6
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libiconv-1.17-nh4rfr3f3pcowrx2xcn2l45yyfy3xzk6
==> Installing perl-math-cdf-0.1-vj3264azi325li5p42ou4vlamvdkw4lv [12/36]
==> No binary for perl-math-cdf-0.1-vj3264azi325li5p42ou4vlamvdkw4lv found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/78/7896bf250835ce47dcc813cb8cf9dc576c5455de42e822dcd7d8d3fef2125565.tar.gz
==> No patches needed for perl-math-cdf
==> perl-math-cdf: Executing phase: 'configure'
==> perl-math-cdf: Executing phase: 'build'
==> perl-math-cdf: Executing phase: 'install'
==> perl-math-cdf: Successfully installed perl-math-cdf-0.1-vj3264azi325li5p42ou4vlamvdkw4lv
Stage: 1.91s. Configure: 1.12s. Build: 7.84s. Install: 0.81s. Post-install: 0.92s. Total: 13.10s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/perl-math-cdf-0.1-vj3264azi325li5p42ou4vlamvdkw4lv
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/perl-exporter-tiny-1.006002-kkoekjyarvzny2o5xwlynomiyzryfbdk
==> Installing perl-list-moreutils-xs-0.430-eehm7tndewwjppp5cfd5pvko5kkkuk6h [14/36]
==> No binary for perl-list-moreutils-xs-0.430-eehm7tndewwjppp5cfd5pvko5kkkuk6h found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/e8/e8ce46d57c179eecd8758293e9400ff300aaf20fefe0a9d15b9fe2302b9cb242.tar.gz
==> No patches needed for perl-list-moreutils-xs
==> perl-list-moreutils-xs: Executing phase: 'configure'
==> Error: ProcessError: Command exited with status 2:
'/usr/bin/perl' 'Makefile.PL' 'INSTALL_BASE=/vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/perl-list-moreutils-xs-0.430-eehm7tndewwjppp5cfd5pvko5kkkuk6h'
2 errors found in build log:
>> 4 Checking for cc... clang-7: error: unknown argument: '-fstack-protect
or-strong'
>> 5 clang-7: error: unknown argument: '-fstack-clash-protection'
6 Can't produce loadable XS module at inc/Config/AutoConf/LMU.pm line 7
3.
7
See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-perl-list-moreutils-xs-0.430-eehm7tndewwjppp5cfd5pvko5kkkuk6h/spack-build-out.txt
==> Warning: Skipping build of perl-list-moreutils-0.430-ctfzqorkamwm7eqlxjkbjx2m6o7g5uxz since perl-list-moreutils-xs-0.430-eehm7tndewwjppp5cfd5pvko5kkkuk6h failed
==> Warning: Skipping build of breakdancer-master-wtojwc5xlsohcxfliylmn6cc4w4hhmly since perl-list-moreutils-0.430-ctfzqorkamwm7eqlxjkbjx2m6o7g5uxz failed
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/perl-sub-uplevel-0.2800-bkslrd6rqxfaum2n4reb2k3v3dv4b6vk
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/perl-module-build-0.4232-ztrz5t3e2iwmfqjlb5ugnbnzkkfedqnz
==> Installing perl-gdgraph-histogram-1.1-smi3mlwjkx47nglooddqzzgjcwys2k7d [17/36]
==> No binary for perl-gdgraph-histogram-1.1-smi3mlwjkx47nglooddqzzgjcwys2k7d found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/20/20f752d0e6deb59b29aa2ec3496b5883476d00280b6e83f5b47c33fac4097f8a.tar.gz
==> No patches needed for perl-gdgraph-histogram
==> perl-gdgraph-histogram: Executing phase: 'configure'
==> perl-gdgraph-histogram: Executing phase: 'build'
==> perl-gdgraph-histogram: Executing phase: 'install'
==> perl-gdgraph-histogram: Successfully installed perl-gdgraph-histogram-1.1-smi3mlwjkx47nglooddqzzgjcwys2k7d
Stage: 1.78s. Configure: 0.75s. Build: 1.26s. Install: 1.01s. Post-install: 1.14s. Total: 7.78s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/perl-gdgraph-histogram-1.1-smi3mlwjkx47nglooddqzzgjcwys2k7d
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/perl-capture-tiny-0.48-fj5rv6qibdoo2xwmakz72hdh6txv4r4m
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/perl-extutils-makemaker-7.70-7pqivh4n7zkj2q44i66b4bdohnowpxr7
==> Installing perl-statistics-descriptive-3.0800-pyp4hq5a34fqm4hsublcw6gi4cckxhcs [20/36]
==> No binary for perl-statistics-descriptive-3.0800-pyp4hq5a34fqm4hsublcw6gi4cckxhcs found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/b0/b04edeea26bfed435aa6029956798c281f7f52d4545f3f45b2ad44954e96f939.tar.gz
==> No patches needed for perl-statistics-descriptive
==> perl-statistics-descriptive: Executing phase: 'configure'
==> perl-statistics-descriptive: Executing phase: 'build'
==> perl-statistics-descriptive: Executing phase: 'install'
==> perl-statistics-descriptive: Successfully installed perl-statistics-descriptive-3.0800-pyp4hq5a34fqm4hsublcw6gi4cckxhcs
Stage: 2.48s. Configure: 0.96s. Build: 1.88s. Install: 1.18s. Post-install: 0.90s. Total: 7.88s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/perl-statistics-descriptive-3.0800-pyp4hq5a34fqm4hsublcw6gi4cckxhcs
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/xextproto-7.3.0-fqunm4iuoxftyzupwdqwbvlogutsvgjc
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/kbproto-1.0.7-xjbmzmuzsjbhwlfxfpujchtevc6m7kqh
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/xtrans-1.4.0-dpidc6fcnkvsy6gktwcyzgn5jvki3pry
==> Installing perl-extutils-pkgconfig-1.16-wc73iicm4bsqil5ypbma2jaie4w7v7mu [24/36]
==> No binary for perl-extutils-pkgconfig-1.16-wc73iicm4bsqil5ypbma2jaie4w7v7mu found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/bb/bbeaced995d7d8d10cfc51a3a5a66da41ceb2bc04fedcab50e10e6300e801c6e.tar.gz
==> No patches needed for perl-extutils-pkgconfig
==> perl-extutils-pkgconfig: Executing phase: 'configure'
==> perl-extutils-pkgconfig: Executing phase: 'build'
==> perl-extutils-pkgconfig: Executing phase: 'install'
==> perl-extutils-pkgconfig: Successfully installed perl-extutils-pkgconfig-1.16-wc73iicm4bsqil5ypbma2jaie4w7v7mu
Stage: 1.82s. Configure: 0.72s. Build: 1.16s. Install: 1.02s. Post-install: 0.88s. Total: 6.15s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/perl-extutils-pkgconfig-1.16-wc73iicm4bsqil5ypbma2jaie4w7v7mu
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/xproto-7.0.31-wspceiqcd5cxcmw4j4o2rxdtq6ndawap
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/inputproto-2.3.2-zlc2xechd5bm5pyaguxsph2ommh7pwgy
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libjpeg-turbo-3.0.0-isdeykvaxqsqvht7e4gy4u4and66oeo7
==> Installing perl-test-exception-0.43-jcsjqessndsfdafweqwddlnbhvldt6rq [28/36]
==> No binary for perl-test-exception-0.43-jcsjqessndsfdafweqwddlnbhvldt6rq found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/15/156b13f07764f766d8b45a43728f2439af81a3512625438deab783b7883eb533.tar.gz
==> No patches needed for perl-test-exception
==> perl-test-exception: Executing phase: 'configure'
==> perl-test-exception: Executing phase: 'build'
==> perl-test-exception: Executing phase: 'install'
==> perl-test-exception: Successfully installed perl-test-exception-0.43-jcsjqessndsfdafweqwddlnbhvldt6rq
Stage: 1.95s. Configure: 1.06s. Build: 1.30s. Install: 0.75s. Post-install: 1.10s. Total: 7.30s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/perl-test-exception-0.43-jcsjqessndsfdafweqwddlnbhvldt6rq
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libx11-1.8.4-uwfs4whz7y6cxrmbfriae5rjsrkltevg
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libtiff-4.5.1-llotejmt2kxuv53dmu7fhwrqrz726ygi
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libgd-2.3.3-is5hfx5ltgpbnqlcji3j46mjw4lnuibm
==> Installing perl-gd-2.77-wltgmyzmfwxxlfbqw57xc2q5yehowrki [32/36]
==> No binary for perl-gd-2.77-wltgmyzmfwxxlfbqw57xc2q5yehowrki found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/b5/b56c88b8ef3be016ce29bb62dd1f1b6f6b5fbcaa57fea59e9468af6901016fb5.tar.gz
==> No patches needed for perl-gd
==> perl-gd: Executing phase: 'configure'
==> perl-gd: Executing phase: 'build'
==> perl-gd: Executing phase: 'install'
==> perl-gd: Successfully installed perl-gd-2.77-wltgmyzmfwxxlfbqw57xc2q5yehowrki
Stage: 3.82s. Configure: 2.05s. Build: 16.39s. Install: 1.43s. Post-install: 1.88s. Total: 29.15s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/perl-gd-2.77-wltgmyzmfwxxlfbqw57xc2q5yehowrki
==> Installing perl-gdtextutil-0.86-y7eptluk7ysnetg4cumnutto57p7y2bb [33/36]
==> No binary for perl-gdtextutil-0.86-y7eptluk7ysnetg4cumnutto57p7y2bb found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/88/886ecbf85cfe94f4135ee5689c4847a9ae783ecb99e6759e12c734f2dd6116bc.tar.gz
==> No patches needed for perl-gdtextutil
==> perl-gdtextutil: Executing phase: 'configure'
==> perl-gdtextutil: Executing phase: 'build'
==> perl-gdtextutil: Executing phase: 'install'
==> perl-gdtextutil: Successfully installed perl-gdtextutil-0.86-y7eptluk7ysnetg4cumnutto57p7y2bb
Stage: 1.85s. Configure: 1.97s. Build: 1.39s. Install: 0.86s. Post-install: 1.81s. Total: 10.26s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/perl-gdtextutil-0.86-y7eptluk7ysnetg4cumnutto57p7y2bb
==> Installing perl-gdgraph-1.4308-qi2nwnlloxm3n6cwmpd2wlqkiigwmyl5 [34/36]
==> No binary for perl-gdgraph-1.4308-qi2nwnlloxm3n6cwmpd2wlqkiigwmyl5 found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/75/75b3c7e280431404ed096c6e120d552cc39052a8610787149515e94b9ba237cb.tar.gz
==> No patches needed for perl-gdgraph
==> perl-gdgraph: Executing phase: 'configure'
==> perl-gdgraph: Executing phase: 'build'
==> perl-gdgraph: Executing phase: 'install'
==> perl-gdgraph: Successfully installed perl-gdgraph-1.4308-qi2nwnlloxm3n6cwmpd2wlqkiigwmyl5
Stage: 3.26s. Configure: 1.14s. Build: 2.17s. Install: 1.44s. Post-install: 2.00s. Total: 12.53s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/perl-gdgraph-1.4308-qi2nwnlloxm3n6cwmpd2wlqkiigwmyl5
==> Error: breakdancer-master-wtojwc5xlsohcxfliylmn6cc4w4hhmly: Package was not installed
==> Error: Installation request failed. Refer to reported errors for failing package(s).