Spack will be used to manage open source software packages on Fugaku.
Fugaku users can easily use pre-installed packages and built packages based on Spack recipes.
The following list shows the results of building/compiling packages for aarch64 according to the Spack recipes.
Note that the results in this list do not guarantee that each package will work properly.
On the other hand, Fujitsu will provide the following packages compiled with Fujitsu compiler on Fugaku as "external" packages, of which Spack can be aware.
|
Compiler | Fujitsu Compiler Fujitsu C/C++ Compiler 4.10.0 tcsds-1.2.38 |
---|---|
Result | Dependency Error |
Failed to install dependency package :
------------------------------------------------
==> Warning: config:terminal_title has been replaced by install_status and is ignored
==> Warning: Failed to initialize repository: '$spack/var/spack/repos/local'.
No repo.yaml found in '$spack/var/spack/repos/local'
To remove the bad repository, run this command:
spack repo rm $spack/var/spack/repos/local
[+] /usr (external autoconf-2.69-titfazaulrbnqxmahzxzof53lmsnabip)
[+] /usr (external automake-1.16.1-fryterkxezzfuo7itm4kijqfnazo5uk4)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/fontsproto-2.1.3-dmtmfug6mhaolzckormbk6lys4wwlxne
[+] /usr (external freetype-2.9.1-cauabtwo5dqzdbkssgtqnfqanh6djcyx)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/xproto-7.0.31-wspceiqcd5cxcmw4j4o2rxdtq6ndawap
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/zlib-ng-2.1.4-m4nsqgrityww4eqljits3svzi4wynus3
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/xtrans-1.4.0-dpidc6fcnkvsy6gktwcyzgn5jvki3pry
[+] /usr (external gmake-4.2.1-eszqmok6vi6wxcmklx6bqloeidbh25kb)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/gnuconfig-2022-09-17-w33oejhx46ex2iql4orzjqdmt2kdqdb2
[+] /usr (external pkgconf-1.4.2-mmjuloqcob6vnd6bylwgum67waaa3kht)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/util-macros-1.19.3-m442vcaczwxiahcumeehvwny3c4a3rzs
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libfontenc-1.1.7-dg2ll22mdmoop26hmfvicr2z5gvv7nyv
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libxfont-1.5.4-wqmyzijarirvtexot2vxkbsemyu2h6rj
==> Installing mkfontscale-1.2.2-lxjwfayh7r37k2qukwnjekqwqvxdlyon [14/17]
==> No binary for mkfontscale-1.2.2-lxjwfayh7r37k2qukwnjekqwqvxdlyon found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/4a/4a5af55e670713024639a7f7d10826d905d86faf574cd77e0f5aef2d00e70168.tar.gz
==> No patches needed for mkfontscale
==> mkfontscale: Executing phase: 'autoreconf'
==> mkfontscale: Executing phase: 'configure'
==> mkfontscale: Executing phase: 'build'
==> Error: ProcessError: Command exited with status 2:
'make' '-j16' 'V=1'
7 errors found in build log:
107 /bin/sh ./config.status --recheck
108 aclocal.m4:17: warning: this file was generated for autoconf 2.71.
109 You have another version of autoconf. It may work, but is not guar
anteed to.
110 If you have problems, you may need to regenerate the build system e
ntirely.
111 To do so, use the procedure documented by the package, typically 'a
utoreconf'.
112 running CONFIG_SHELL=/bin/sh /bin/sh /data/rccs-sdt/a01008/tmpdir/s
pack-stage/spack-stage-mkfontscale-1.2.2-lxjwfayh7r37k2qukwnjekqwqv
xdlyon/spack-src/configure --prefix=/vol0003/rccs-sdt/data/a01008/s
pack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.1
0.0/mkfontscale-1.2.2-lxjwfayh7r37k2qukwnjekqwqvxdlyon CC=/vol0003/
rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/lib/spack/en
v/fj/fcc PKG_CONFIG_PATH=/vol0003/rccs-sdt/data/a01008/spack-all-te
st/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libfont
enc-1.1.7-dg2ll22mdmoop26hmfvicr2z5gvv7nyv/lib/pkgconfig:/vol0003/r
ccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/lin
ux-rhel8-a64fx/fj-4.10.0/xproto-7.0.31-wspceiqcd5cxcmw4j4o2rxdtq6nd
awap/lib/pkgconfig:/vol0003/rccs-sdt/data/a01008/spack-all-test/env
-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/util-macros-1
.19.3-m442vcaczwxiahcumeehvwny3c4a3rzs/share/pkgconfig:/vol0003/rcc
s-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux
-rhel8-a64fx/fj-4.10.0/zlib-ng-2.1.4-m4nsqgrityww4eqljits3svzi4wynu
s3/lib/pkgconfig:/usr/share/pkgconfig:/usr/lib64/pkgconfig --no-cre
ate --no-recursion
>> 113 configure.ac:33: error: version mismatch. This is Automake 1.16.1,
>> 114 configure.ac:33: but the definition used by this AM_INIT_AUTOMAKE
>> 115 configure.ac:33: comes from Automake 1.16.5. You should recreate
>> 116 configure.ac:33: aclocal.m4 with aclocal and run automake again.
117 WARNING: 'automake-1.16' is probably too old.
118 You should only need it if you modified 'Makefile.am' or
119 'configure.ac' or m4 files included by 'configure.ac'.
120 The 'automake' program is part of the GNU Automake package
:
121 <https://www.gnu.org/software/automake>
122 It also requires GNU Autoconf, GNU m4 and Perl in order to
run:
123 <https://www.gnu.org/software/autoconf>
124 <https://www.gnu.org/software/m4/>
125 <https://www.perl.org/>
>> 126 make: *** [Makefile:438: /data/rccs-sdt/a01008/tmpdir/spack-stage/s
pack-stage-mkfontscale-1.2.2-lxjwfayh7r37k2qukwnjekqwqvxdlyon/spack
-src/Makefile.in] Error 1
127 make: *** Waiting for unfinished jobs....
128 checking for gcc... /vol0003/rccs-sdt/data/a01008/spack-all-test/en
v-20240227/spack/lib/spack/env/fj/fcc
129 checking whether the C compiler works... yes
130 checking for C compiler default output file name... a.out
131 checking for suffix of executables...
132 checking whether we are cross compiling... no
...
156 checking whether build environment is sane... yes
157 checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
158 checking for gawk... gawk
159 checking whether make sets $(MAKE)... yes
160 checking whether make supports the include directive... yes (GNU st
yle)
161 checking whether make supports nested variables... yes
>> 162 configure: error: source directory already configured; run "make di
stclean" there first
>> 163 make: *** [Makefile:461: config.status] Error 1
See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-mkfontscale-1.2.2-lxjwfayh7r37k2qukwnjekqwqvxdlyon/spack-build-out.txt
==> Warning: Skipping build of mkfontdir-1.0.7-ikjvchunhzhumnffo6fqqaohocr6gedu since mkfontscale-1.2.2-lxjwfayh7r37k2qukwnjekqwqvxdlyon failed
==> Warning: Skipping build of font-util-1.4.0-6qg2mp4llgjhbiayfm6t6iwjaskiiw7q since mkfontdir-1.0.7-ikjvchunhzhumnffo6fqqaohocr6gedu failed
==> Error: font-util-1.4.0-6qg2mp4llgjhbiayfm6t6iwjaskiiw7q: Package was not installed
==> Error: Installation request failed. Refer to reported errors for failing package(s).
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/bdftopcf-1.1-qmwehxloede2emtjj6mrjg2l4tp3vmkv