Spack will be used to manage open source software packages on Fugaku.
Fugaku users can easily use pre-installed packages and built packages based on Spack recipes.
The following list shows the results of building/compiling packages for aarch64 according to the Spack recipes.
Note that the results in this list do not guarantee that each package will work properly.
On the other hand, Fujitsu will provide the following packages compiled with Fujitsu compiler on Fugaku as "external" packages, of which Spack can be aware.
|
Compiler | Fujitsu Compiler Fujitsu C/C++ Compiler 4.10.0 tcsds-1.2.38 |
---|---|
Result | Dependency Error |
Failed to install dependency package :
------------------------------------------------
==> Warning: config:terminal_title has been replaced by install_status and is ignored
==> Warning: Failed to initialize repository: '$spack/var/spack/repos/local'.
No repo.yaml found in '$spack/var/spack/repos/local'
To remove the bad repository, run this command:
spack repo rm $spack/var/spack/repos/local
[+] /usr (external gmake-4.2.1-eszqmok6vi6wxcmklx6bqloeidbh25kb)
[+] /usr (external curl-7.61.1-qsvgylcys5hkzdnl2pdh4blrprxlsp5m)
[+] /usr (external ncurses-6.1-a6lc7oq2dlgphtibbpp6x72mqgmscros)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/ninja-1.11.1-hkoahomauz36ql3b7gyr3bbjctk3swkj
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/gnuconfig-2022-09-17-w33oejhx46ex2iql4orzjqdmt2kdqdb2
[+] /usr (external sqlite-3.26.0-mk7hngumxevy3u6wqoaco5sgzevallwn)
[+] /usr (external libpng-1.6.34-xtms7s6d3iod6ac4f3fps6a5ksxtwdpa)
[+] /usr (external pkgconf-1.4.2-mmjuloqcob6vnd6bylwgum67waaa3kht)
[+] /usr (external bzip2-1.0.6-r4iabrte3nd5eemcd5v5coc3kvsnoyzu)
[+] /usr (external lz4-1.8.3-ldbpdr7ujm6p5vdasnwd2ujsioqi34gf)
[+] /opt/FJSVxtclanga/tcsds-mpi-latest (external fujitsu-mpi-head-3njd5uwuazr4j2no6fqh4cpjmezknh3z)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/snappy-1.1.10-j7x2zk63lmbm36rc724j3ik66antzv5k
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libaec-1.0.6-5mds5a4x6u7m2ysxqxxgm2l6tpax77ds
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/zstd-1.5.5-o7dcxyae4kjgruht44yuloa27ddisxfe
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libjpeg-turbo-3.0.0-isdeykvaxqsqvht7e4gy4u4and66oeo7
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/json-c-0.16-tx4gocc4f3cjm6ggjst7q6e3xhl3r2ya
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/zlib-ng-2.1.4-m4nsqgrityww4eqljits3svzi4wynus3
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libmd-1.0.4-c6kxvz3uxe2gfan53cddxzubiobsk6j7
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/hdf5-1.14.3-qxnacxgse3udxh7b6wscu6iz3vsyvu6a
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libtiff-4.5.1-llotejmt2kxuv53dmu7fhwrqrz726ygi
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/cmake-3.27.7-ussgjuqkqbxi5dcv7kbp6bugdcjc5ph6
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libbsd-0.11.7-ovlcn2spf2nziz5itskfcmtdbqscyqii
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/proj-9.2.1-y6ebguo5q3jqjq2rnkyvtoo7oasfvtuv
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/c-blosc-1.21.5-66ynsnfbl2evrc6id523jcamtzvu2ugx
==> Installing geos-3.12.0-zejfdtvf67bdd46tjvvy5keji6kfxpn3 [25/31]
==> No binary for geos-3.12.0-zejfdtvf67bdd46tjvvy5keji6kfxpn3 found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/d9/d96db96011259178a35555a0f6d6e75a739e52a495a6b2aa5efb3d75390fbc39.tar.bz2
==> No patches needed for geos
==> geos: Executing phase: 'cmake'
==> geos: Executing phase: 'build'
==> geos: Executing phase: 'install'
==> geos: Successfully installed geos-3.12.0-zejfdtvf67bdd46tjvvy5keji6kfxpn3
Stage: 39.67s. Cmake: 16.80s. Build: 19m 32.65s. Install: 25.40s. Post-install: 8.52s. Total: 21m 4.71s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/geos-3.12.0-zejfdtvf67bdd46tjvvy5keji6kfxpn3
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/expat-2.5.0-wuv6zzro2s4luf6r3x6zecsjv5ew2xnh
==> Installing libgeotiff-1.7.1-avqa4eibl5cunlpp3xwqhupssu2yw2ss [27/31]
==> No binary for libgeotiff-1.7.1-avqa4eibl5cunlpp3xwqhupssu2yw2ss found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/05/05ab1347aaa471fc97347d8d4269ff0c00f30fa666d956baba37948ec87e55d6.tar.gz
==> No patches needed for libgeotiff
==> libgeotiff: Executing phase: 'autoreconf'
==> libgeotiff: Executing phase: 'configure'
==> libgeotiff: Executing phase: 'build'
==> libgeotiff: Executing phase: 'install'
==> libgeotiff: Successfully installed libgeotiff-1.7.1-avqa4eibl5cunlpp3xwqhupssu2yw2ss
Stage: 5.44s. Autoreconf: 0.80s. Configure: 49.21s. Build: 43.85s. Install: 2.26s. Post-install: 1.45s. Total: 1m 45.16s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libgeotiff-1.7.1-avqa4eibl5cunlpp3xwqhupssu2yw2ss
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/netcdf-c-4.9.2-gnv35ekwuowxz4iyaik777xaxvno4pvm
==> Installing gdal-3.7.3-o7ber2dnhkk5ddjmkbfnh3lvbl7gb2xe [29/31]
==> No binary for gdal-3.7.3-o7ber2dnhkk5ddjmkbfnh3lvbl7gb2xe found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/e0/e0a6f0c453ea7eb7c09967f50ac49426808fcd8f259dbc9888140eb69d7ffee6.tar.xz
==> Ran patch() for gdal
==> gdal: Executing phase: 'cmake'
==> gdal: Executing phase: 'build'
==> gdal: Executing phase: 'install'
==> gdal: Successfully installed gdal-3.7.3-o7ber2dnhkk5ddjmkbfnh3lvbl7gb2xe
Stage: 1m 18.14s. Cmake: 4m 3.41s. Build: 28m 18.79s. Install: 30.60s. Post-install: 8.21s. Total: 34m 22.72s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/gdal-3.7.3-o7ber2dnhkk5ddjmkbfnh3lvbl7gb2xe
==> Installing gmt-4.5.18-4mznbi66pfpscmhxcucmxyw66jmxn5uv [30/31]
==> No binary for gmt-4.5.18-4mznbi66pfpscmhxcucmxyw66jmxn5uv found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/27/27c30b516c317fed8e44efa84a0262f866521d80cfe76a61bf12952efb522b63.tar.bz2
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/9b/9bb1a956fca0718c083bef842e625797535a00ce81f175df08b042c2a92cfe7f.tar.gz
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/d4/d4e208dca88fbf42cba1bb440fbd96ea2f932185c86001f327ed0c7b65d27af1.tar.gz
==> Moving resource stage
source: /data/rccs-sdt/a01008/tmpdir/spack-stage/resource-gshhg-4mznbi66pfpscmhxcucmxyw66jmxn5uv/spack-src/
destination: /data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-gmt-4.5.18-4mznbi66pfpscmhxcucmxyw66jmxn5uv/spack-src/share/gshhg
==> Moving resource stage
source: /data/rccs-sdt/a01008/tmpdir/spack-stage/resource-dcw-4mznbi66pfpscmhxcucmxyw66jmxn5uv/spack-src/
destination: /data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-gmt-4.5.18-4mznbi66pfpscmhxcucmxyw66jmxn5uv/spack-src/share/dcw
==> Applied patch /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/repos/builtin/packages/gmt/type.patch
==> gmt: Executing phase: 'autoreconf'
==> gmt: Executing phase: 'configure'
==> gmt: Executing phase: 'build'
==> gmt: Executing phase: 'install'
==> gmt: Successfully installed gmt-4.5.18-4mznbi66pfpscmhxcucmxyw66jmxn5uv
Stage: 1m 0.79s. Autoreconf: 2.49s. Configure: 2m 51.25s. Build: 22m 4.42s. Install: 13.88s. Post-install: 5.75s. Total: 26m 25.48s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/gmt-4.5.18-4mznbi66pfpscmhxcucmxyw66jmxn5uv
==> Installing fstrack-0.5.3.092918-wpcazge7dt2mml35jk7nsvwaof2mfgb7 [31/31]
==> No binary for fstrack-0.5.3.092918-wpcazge7dt2mml35jk7nsvwaof2mfgb7 found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/34/34b31687fdfa207b9659425238b805eaacf0b0209e7e3343c1a3cb4c9e62345d.tgz
==> No patches needed for fstrack
==> fstrack: Executing phase: 'edit'
==> fstrack: Executing phase: 'build'
==> Error: ProcessError: Command exited with status 2:
'make' '-j1'
1 error found in build log:
355 Fortran diagnostic messages: program name(drex_compute_avg_axes_ftr
n)
356 jwd1185i-s "drex_util.f90", line 1009: In an initialization or s
pecification expression, 'DREX_PI' must be a named constant.
357 jwd2018i-s "drex_util.f90", line 1009: When IMPLICIT NONE is spe
cified, 'DREX_PI' must be declared in a type declaration statement.
358 jwd2005i-w "drex_util.f90", line 1025: 'twopi' is used but never
set.
359 jwd2004i-i "drex_util.f90", line 1044: 'odfsum' is set but never
used.
360 jwd2005i-w "drex_util.f90", line 1127: 'pi' is used but never se
t.
>> 361 make: *** [makefile:115: objects/aarch64//drex_util.o] Error 1
See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-fstrack-0.5.3.092918-wpcazge7dt2mml35jk7nsvwaof2mfgb7/spack-build-out.txt