List of Open Source Software which can be built on Fugaku

Spack logo
Spack will be used to manage open source software packages on Fugaku. Fugaku users can easily use pre-installed packages and built packages based on Spack recipes. The following list shows the results of building/compiling packages for aarch64 according to the Spack recipes. Note that the results in this list do not guarantee that each package will work properly. On the other hand, Fujitsu will provide the following packages compiled with Fujitsu compiler on Fugaku as "external" packages, of which Spack can be aware.
  • OpenJDK 11
  • Ruby 2.6.5 or later
  • Python2 2.7.15
  • Python3 3.6.8
  • Numpy 1.14.3
  • SciPy 1.0.0
  • Eclipse IDE 2019-09 R Packages
Please contact us from email:

hicops release

Compiler Fujitsu Compiler Fujitsu C/C++ Compiler 4.10.0 tcsds-1.2.38
Result Dependency Error

Failed Reason

Failed to install dependency package :
------------------------------------------------
==> Installing py-typing-extensions-4.8.0-h6ii6mj74u4ufujuqontagq3mdqwmopi [66/83]
==> No binary for py-typing-extensions-4.8.0-h6ii6mj74u4ufujuqontagq3mdqwmopi found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/df/df8e4339e9cb77357558cbdbceca33c303714cf861d1eef15e1070055ae8b7ef.tar.gz
==> No patches needed for py-typing-extensions
==> py-typing-extensions: Executing phase: 'install'
==> py-typing-extensions: Successfully installed py-typing-extensions-4.8.0-h6ii6mj74u4ufujuqontagq3mdqwmopi
Stage: 0.56s. Install: 54.82s. Post-install: 4.11s. Total: 1m 3.12s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-typing-extensions-4.8.0-h6ii6mj74u4ufujuqontagq3mdqwmopi
==> Installing py-pyparsing-3.0.9-is3hvxyb3mg23mqnofyczddpvaizmwp2 [67/83]
==> No binary for py-pyparsing-3.0.9-is3hvxyb3mg23mqnofyczddpvaizmwp2 found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/2b/2b020ecf7d21b687f219b71ecad3631f644a47f01403fa1d1036b0c6416d70fb.tar.gz
==> No patches needed for py-pyparsing
==> py-pyparsing: Executing phase: 'install'
==> py-pyparsing: Successfully installed py-pyparsing-3.0.9-is3hvxyb3mg23mqnofyczddpvaizmwp2
Stage: 36.60s. Install: 1m 10.52s. Post-install: 5.33s. Total: 1m 56.40s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-pyparsing-3.0.9-is3hvxyb3mg23mqnofyczddpvaizmwp2
==> Installing py-openpyxl-3.1.2-koqc3eiv2osdwspebiosbximxdbxhuqd [68/83]
==> No binary for py-openpyxl-3.1.2-koqc3eiv2osdwspebiosbximxdbxhuqd found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/a6/a6f5977418eff3b2d5500d54d9db50c8277a368436f4e4f8ddb1be3422870184.tar.gz
==> No patches needed for py-openpyxl
==> py-openpyxl: Executing phase: 'install'
==> py-openpyxl: Successfully installed py-openpyxl-3.1.2-koqc3eiv2osdwspebiosbximxdbxhuqd
Stage: 10.59s. Install: 3m 30.35s. Post-install: 22.96s. Total: 4m 7.99s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-openpyxl-3.1.2-koqc3eiv2osdwspebiosbximxdbxhuqd
==> Installing py-pyproject-metadata-0.7.1-xl3eftdhozup7ps7a3m43ajkv4wv2xuk [69/83]
==> No binary for py-pyproject-metadata-0.7.1-xl3eftdhozup7ps7a3m43ajkv4wv2xuk found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/0a/0a94f18b108b9b21f3a26a3d541f056c34edcb17dc872a144a15618fed7aef67.tar.gz
==> No patches needed for py-pyproject-metadata
==> py-pyproject-metadata: Executing phase: 'install'
==> py-pyproject-metadata: Successfully installed py-pyproject-metadata-0.7.1-xl3eftdhozup7ps7a3m43ajkv4wv2xuk
Stage: 0.68s. Install: 1m 31.09s. Post-install: 4.38s. Total: 1m 40.28s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-pyproject-metadata-0.7.1-xl3eftdhozup7ps7a3m43ajkv4wv2xuk
==> Installing py-versioneer-0.29-5msdaph4nydattrma7v7i4mgpd3jb4zc [70/83]
==> No binary for py-versioneer-0.29-5msdaph4nydattrma7v7i4mgpd3jb4zc found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/5a/5ab283b9857211d61b53318b7c792cf68e798e765ee17c27ade9f6c924235731.tar.gz
==> No patches needed for py-versioneer
==> py-versioneer: Executing phase: 'install'
==> py-versioneer: Successfully installed py-versioneer-0.29-5msdaph4nydattrma7v7i4mgpd3jb4zc
Stage: 3.68s. Install: 2m 21.73s. Post-install: 4.31s. Total: 2m 33.58s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-versioneer-0.29-5msdaph4nydattrma7v7i4mgpd3jb4zc
==> Installing py-setuptools-scm-7.1.0-tmehvhcl5myabfddubenadft233jpari [71/83]
==> No binary for py-setuptools-scm-7.1.0-tmehvhcl5myabfddubenadft233jpari found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/6c/6c508345a771aad7d56ebff0e70628bf2b0ec7573762be9960214730de278f27.tar.gz
==> No patches needed for py-setuptools-scm
==> py-setuptools-scm: Executing phase: 'install'
==> py-setuptools-scm: Successfully installed py-setuptools-scm-7.1.0-tmehvhcl5myabfddubenadft233jpari
Stage: 2.74s. Install: 1m 43.98s. Post-install: 7.82s. Total: 2m 1.08s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-setuptools-scm-7.1.0-tmehvhcl5myabfddubenadft233jpari
==> Installing py-numpy-1.26.1-q4mk4po6aqr572rvkvy4nuwlclspik6k [72/83]
==> No binary for py-numpy-1.26.1-q4mk4po6aqr572rvkvy4nuwlclspik6k found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/c8/c8c6c72d4a9f831f328efb1312642a1cafafaa88981d9ab76368d50d07d93cbe.tar.gz
==> Applied patch /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/repos/builtin/packages/py-numpy/check_executables.patch
==> py-numpy: Executing phase: 'install'
==> Error: ProcessError: Command exited with status 1:
'/vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/python-3.9.18-5ibilyqs26rwh7735nxxsaz6dxx54cej/bin/python3.9' '-m' 'pip' '-vvv' '--no-input' '--no-cache-dir' '--disable-pip-version-check' 'install' '--no-deps' '--ignore-installed' '--no-build-isolation' '--no-warn-script-location' '--no-index' '--prefix=/vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-numpy-1.26.1-q4mk4po6aqr572rvkvy4nuwlclspik6k' '--config-settings=builddir=build' '--config-settings=compile-args=-j16' '--config-settings=setup-args=-Dblas=fjlapackexsve' '--config-settings=setup-args=-Dlapack=fjlapackexsve' '.'

2 errors found in build log:
64
65 Library m found: YES
66 Found CMake: /usr/bin/cmake (3.20.2)
67 WARNING: CMake Toolchain: Failed to determine CMake compilers stat
e
68 Run-time dependency fjlapackexsve found: NO (tried pkgconfig and c
make)
69
>> 70 ../numpy/meson.build:169:4: ERROR: Problem encountered: No BLAS libr
ary detected! Install one, or use the `allow-noblas` build option (n
ote, this may be up to 100x slower for some linear algebra operation
s).
71
72 A full log can be found at /vol0003/rccs-sdt/data/a01008/tmpdir/sp
ack-stage/spack-stage-py-numpy-1.26.1-q4mk4po6aqr572rvkvy4nuwlclspik
6k/spack-src/build/meson-logs/meson-log.txt
73 error: subprocess-exited-with-error
74
75 × Preparing metadata (pyproject.toml) did not run successfully.
76 │ exit code: 1
77 ╰─> See above for output.
78
79 note: This error originates from a subprocess, and is likely not a
problem with pip.
80 full command: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-202
40227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/python-3.9.18-5ibi
lyqs26rwh7735nxxsaz6dxx54cej/bin/python3.9 /vol0003/rccs-sdt/data/a0
1008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/f
j-4.10.0/py-pip-23.1.2-2nhb4fchdimmuf57brv4lcpw2465uhnk/lib/python3.
9/site-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.
py prepare_metadata_for_build_wheel /data/rccs-sdt/a01008/tmpdir/tmp
z6u2v4o5
81 cwd: /vol0003/rccs-sdt/data/a01008/tmpdir/spack-stage/spack-stage-
py-numpy-1.26.1-q4mk4po6aqr572rvkvy4nuwlclspik6k/spack-src
82 Preparing metadata (pyproject.toml): finished with status 'error'
>> 83 error: metadata-generation-failed
84
85 × Encountered error while generating package metadata.
86 ╰─> See above for output.
87
88 note: This is an issue with the package mentioned above, not pip.
89 hint: See above for details.

See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-py-numpy-1.26.1-q4mk4po6aqr572rvkvy4nuwlclspik6k/spack-build-out.txt

==> Warning: Skipping build of py-bottleneck-1.3.7-3vny2mre4jyydsuouyp2l3wofoxirbf5 since py-numpy-1.26.1-q4mk4po6aqr572rvkvy4nuwlclspik6k failed
==> Warning: Skipping build of py-pandas-1.5.3-a7sxcmien543u4gel53xphofheoq3ff4 since py-bottleneck-1.3.7-3vny2mre4jyydsuouyp2l3wofoxirbf5 failed
==> Warning: Skipping build of py-numexpr-2.8.4-s6cq5fk55zftj3elb24sypyefpo7e7td since py-numpy-1.26.1-q4mk4po6aqr572rvkvy4nuwlclspik6k failed
==> Warning: Skipping build of py-contourpy-1.0.7-toc4f465l2tz276kmhtj3vvqyt2t34vy since py-numpy-1.26.1-q4mk4po6aqr572rvkvy4nuwlclspik6k failed
==> Warning: Skipping build of py-matplotlib-3.8.1-lbqkvk56bmoxjwf3zvgtghxzmroojlcu since py-contourpy-1.0.7-toc4f465l2tz276kmhtj3vvqyt2t34vy failed
==> Installing py-zipp-3.17.0-laprlx5xjbzsvxxzldmd5yinhmayhogj [73/83]
==> No binary for py-zipp-3.17.0-laprlx5xjbzsvxxzldmd5yinhmayhogj found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/84/84e64a1c28cf7e91ed2078bb8cc8c259cb19b76942096c8d7b84947690cabaf0.tar.gz
==> No patches needed for py-zipp
==> py-zipp: Executing phase: 'install'
==> py-zipp: Successfully installed py-zipp-3.17.0-laprlx5xjbzsvxxzldmd5yinhmayhogj
Stage: 2.88s. Install: 1m 36.64s. Post-install: 5.38s. Total: 1m 51.03s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-zipp-3.17.0-laprlx5xjbzsvxxzldmd5yinhmayhogj
==> Installing py-python-dateutil-2.8.2-zascnhe2uwhvdfgdmb7vsv6xkxe23mck [74/83]
==> No binary for py-python-dateutil-2.8.2-zascnhe2uwhvdfgdmb7vsv6xkxe23mck found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/01/0123cacc1627ae19ddf3c27a5de5bd67ee4586fbdd6440d9748f8abb483d3e86.tar.gz
==> No patches needed for py-python-dateutil
==> py-python-dateutil: Executing phase: 'install'
==> py-python-dateutil: Successfully installed py-python-dateutil-2.8.2-zascnhe2uwhvdfgdmb7vsv6xkxe23mck
Stage: 3.82s. Install: 1m 41.71s. Post-install: 7.03s. Total: 1m 58.70s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-python-dateutil-2.8.2-zascnhe2uwhvdfgdmb7vsv6xkxe23mck
==> Installing py-cppy-1.2.1-d3rb5kg5dgafz4wqhfywdfvxh6xkmlbr [75/83]
==> No binary for py-cppy-1.2.1-d3rb5kg5dgafz4wqhfywdfvxh6xkmlbr found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/83/83b43bf17b1085ac15c5debdb42154f138b928234b21447358981f69d0d6fe1b.tar.gz
==> No patches needed for py-cppy
==> py-cppy: Executing phase: 'install'
==> py-cppy: Successfully installed py-cppy-1.2.1-d3rb5kg5dgafz4wqhfywdfvxh6xkmlbr
Stage: 1.55s. Install: 1m 34.88s. Post-install: 5.37s. Total: 1m 47.62s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-cppy-1.2.1-d3rb5kg5dgafz4wqhfywdfvxh6xkmlbr
==> Installing py-importlib-resources-5.12.0-guf46y5xspa6vsc367hynsjlhlkprp3r [76/83]
==> No binary for py-importlib-resources-5.12.0-guf46y5xspa6vsc367hynsjlhlkprp3r found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/4b/4be82589bf5c1d7999aedf2a45159d10cb3ca4f19b2271f8792bc8e6da7b22f6.tar.gz
==> No patches needed for py-importlib-resources
==> py-importlib-resources: Executing phase: 'install'
==> py-importlib-resources: Successfully installed py-importlib-resources-5.12.0-guf46y5xspa6vsc367hynsjlhlkprp3r
Stage: 4.02s. Install: 1m 41.36s. Post-install: 8.41s. Total: 1m 59.83s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-importlib-resources-5.12.0-guf46y5xspa6vsc367hynsjlhlkprp3r
==> Installing py-kiwisolver-1.4.5-2hxj665axr3lf7ayfp7x46ux3ayxbanm [77/83]
==> No binary for py-kiwisolver-1.4.5-2hxj665axr3lf7ayfp7x46ux3ayxbanm found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/e5/e57e563a57fb22a142da34f38acc2fc1a5c864bc29ca1517a88abc963e60d6ec.tar.gz
==> No patches needed for py-kiwisolver
==> py-kiwisolver: Executing phase: 'install'
==> py-kiwisolver: Successfully installed py-kiwisolver-1.4.5-2hxj665axr3lf7ayfp7x46ux3ayxbanm
Stage: 3.64s. Install: 4m 20.25s. Post-install: 5.49s. Total: 4m 39.20s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-kiwisolver-1.4.5-2hxj665axr3lf7ayfp7x46ux3ayxbanm
==> Error: hicops-release-fbc6wssphoijdlzvqymjn32waqna2bkm: Package was not installed
==> Error: Installation request failed. Refer to reported errors for failing package(s).


<= Back to list