Spack will be used to manage open source software packages on Fugaku.
Fugaku users can easily use pre-installed packages and built packages based on Spack recipes.
The following list shows the results of building/compiling packages for aarch64 according to the Spack recipes.
Note that the results in this list do not guarantee that each package will work properly.
On the other hand, Fujitsu will provide the following packages compiled with Fujitsu compiler on Fugaku as "external" packages, of which Spack can be aware.
|
Compiler | Fujitsu Compiler Fujitsu C/C++ Compiler 4.10.0 tcsds-1.2.38 |
---|---|
Result | Dependency Error |
Failed to install dependency package :
------------------------------------------------
==> Warning: config:terminal_title has been replaced by install_status and is ignored
==> Warning: Failed to initialize repository: '$spack/var/spack/repos/local'.
No repo.yaml found in '$spack/var/spack/repos/local'
To remove the bad repository, run this command:
spack repo rm $spack/var/spack/repos/local
[+] /usr (external curl-7.61.1-qsvgylcys5hkzdnl2pdh4blrprxlsp5m)
[+] /usr (external ncurses-6.1-a6lc7oq2dlgphtibbpp6x72mqgmscros)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/zlib-ng-2.1.4-m4nsqgrityww4eqljits3svzi4wynus3
[+] /usr (external gmake-4.2.1-eszqmok6vi6wxcmklx6bqloeidbh25kb)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/gnuconfig-2022-09-17-w33oejhx46ex2iql4orzjqdmt2kdqdb2
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/cmake-3.27.7-ussgjuqkqbxi5dcv7kbp6bugdcjc5ph6
==> Installing libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbvbkjt [7/8]
==> No binary for libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbvbkjt found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/b0/b06aa538fefc9c6b33c4db4931a09a5f52d9d2357219afcbff7d93fe12ebf6f7.tar.gz
==> No patches needed for libressl
==> libressl: Executing phase: 'autoreconf'
==> libressl: Executing phase: 'configure'
==> libressl: Executing phase: 'build'
==> Error: ProcessError: Command exited with status 2:
'make' '-j16' 'V=1'
11 errors found in build log:
>> 4 ==> [2024-03-23-20:48:04.974457] PermissionError: [Errno 13] Permi
ssion denied: '/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stag
e-libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbvbkjt/spack-src/script
s/config.sub'
>> 5 ==> [2024-03-23-20:48:20.493922] PermissionError: [Errno 13] Permi
ssion denied: '/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stag
e-libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbvbkjt/spack-src/script
s/config.guess'
6 ==> [2024-03-23-20:48:20.496510] Find (not recursive): /vol0003/rc
cs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/lin
ux-rhel8-a64fx/fj-4.10.0/gnuconfig-2022-09-17-w33oejhx46ex2iql4orz
jqdmt2kdqdb2 ['config.sub', 'config.guess']
7 ==> [2024-03-23-20:48:20.521579] Find complete: /vol0003/rccs-sdt/
data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel
8-a64fx/fj-4.10.0/gnuconfig-2022-09-17-w33oejhx46ex2iql4orzjqdmt2k
dqdb2 ['config.sub', 'config.guess']
8 ==> [2024-03-23-20:48:34.148231] Copying /vol0003/rccs-sdt/data/a0
1008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx
/fj-4.10.0/gnuconfig-2022-09-17-w33oejhx46ex2iql4orzjqdmt2kdqdb2/c
onfig.sub to /data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-
libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbvbkjt/spack-src/scripts/
config.sub
9 ==> [2024-03-23-20:48:34.193986] Copying /vol0003/rccs-sdt/data/a0
1008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx
/fj-4.10.0/gnuconfig-2022-09-17-w33oejhx46ex2iql4orzjqdmt2kdqdb2/c
onfig.guess to /data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stag
e-libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbvbkjt/spack-src/script
s/config.guess
10 ==> libressl: Executing phase: 'configure'
11 ==> [2024-03-23-20:48:34.285728] Find (recursive): /data/rccs-sdt/
a01008/tmpdir/spack-stage/spack-stage-libressl-3.7.2-va3fkdmokdfp5
vfbs5lnzsruojbvbkjt/spack-src ['configure']
...
2011 cd .. && make am--refresh
2012 make[2]: Entering directory '/vol0003/rccs-sdt/data/a01008/tmpdir/
spack-stage/spack-stage-libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojb
vbkjt/spack-src'
2013 CDPATH="${ZSH_VERSION+.}:" && cd /data/rccs-sdt/a01008/tmpdir/spac
k-stage/spack-stage-libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbvbkj
t/spack-src && /bin/sh '/data/rccs-sdt/a01008/tmpdir/spack-stage/s
pack-stage-libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbvbkjt/spack-s
rc/missing' autoconf
2014 cd /data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-libressl-
3.7.2-va3fkdmokdfp5vfbs5lnzsruojbvbkjt/spack-src && /bin/sh /data/
rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-libressl-3.7.2-va3f
kdmokdfp5vfbs5lnzsruojbvbkjt/spack-src/missing automake-1.16 --for
eign
2015 /bin/sh ./config.status --recheck
2016 running CONFIG_SHELL=/bin/sh /bin/sh /data/rccs-sdt/a01008/tmpdir/
spack-stage/spack-stage-libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojb
vbkjt/spack-src/configure --prefix=/vol0003/rccs-sdt/data/a01008/s
pack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.
10.0/libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbvbkjt --enable-shar
ed --disable-static CC=/vol0003/rccs-sdt/data/a01008/spack-all-tes
t/env-20240227/spack/lib/spack/env/fj/fcc --no-create --no-recursi
on
>> 2017 configure.ac:21: error: version mismatch. This is Automake 1.16.1
,
>> 2018 configure.ac:21: but the definition used by this AM_INIT_AUTOMAKE
>> 2019 configure.ac:21: comes from Automake 1.16.5. You should recreate
>> 2020 configure.ac:21: aclocal.m4 with aclocal and run automake again.
2021 checking build system type... aarch64-unknown-linux-gnu
2022 checking host system type... aarch64-unknown-linux-gnu
2023 checking for a BSD-compatible install... /usr/bin/install -c
2024 checking whether build environment is sane... yes
2025 checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
2026 checking for gawk... gawk
2027 checking whether make sets $(MAKE)... yes
2028 checking whether make supports nested variables... yes
>> 2029 configure: error: source directory already configured; run "make d
istclean" there first
>> 2030 make[2]: *** [Makefile:408: config.status] Error 1
2031 make[2]: *** Waiting for unfinished jobs....
2032 WARNING: 'automake-1.16' is probably too old.
2033 You should only need it if you modified 'Makefile.am' or
2034 'configure.ac' or m4 files included by 'configure.ac'.
2035 The 'automake' program is part of the GNU Automake packag
e:
2036 <https://www.gnu.org/software/automake>
2037 It also requires GNU Autoconf, GNU m4 and Perl in order t
o run:
2038 <https://www.gnu.org/software/autoconf>
2039 <https://www.gnu.org/software/m4/>
2040 <https://www.perl.org/>
>> 2041 make[2]: *** [Makefile:385: /data/rccs-sdt/a01008/tmpdir/spack-sta
ge/spack-stage-libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbvbkjt/spa
ck-src/Makefile.in] Error 1
2042 make[2]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/s
pack-stage/spack-stage-libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbv
bkjt/spack-src'
>> 2043 make[1]: *** [Makefile:489: /data/rccs-sdt/a01008/tmpdir/spack-sta
ge/spack-stage-libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbvbkjt/spa
ck-src/configure] Error 2
2044 make[1]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/s
pack-stage/spack-stage-libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbv
bkjt/spack-src/ssl'
>> 2045 make: *** [Makefile:461: all-recursive] Error 1
See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbvbkjt/spack-build-out.txt
==> Warning: Skipping build of jwt-cpp-0.6.0-exrbzdltuoa6yesraxkw7dbtnm43hvql since libressl-3.7.2-va3fkdmokdfp5vfbs5lnzsruojbvbkjt failed
==> Error: jwt-cpp-0.6.0-exrbzdltuoa6yesraxkw7dbtnm43hvql: Package was not installed
==> Error: Installation request failed. Refer to reported errors for failing package(s).