List of Open Source Software which can be built on Fugaku

Spack logo
Spack will be used to manage open source software packages on Fugaku. Fugaku users can easily use pre-installed packages and built packages based on Spack recipes. The following list shows the results of building/compiling packages for aarch64 according to the Spack recipes. Note that the results in this list do not guarantee that each package will work properly. On the other hand, Fujitsu will provide the following packages compiled with Fujitsu compiler on Fugaku as "external" packages, of which Spack can be aware.
  • OpenJDK 11
  • Ruby 2.6.5 or later
  • Python2 2.7.15
  • Python3 3.6.8
  • Numpy 1.14.3
  • SciPy 1.0.0
  • Eclipse IDE 2019-09 R Packages
Please contact us from email:

librom develop

Compiler Fujitsu Compiler Fujitsu C/C++ Compiler 4.10.0 tcsds-1.2.38
Result Dependency Error

Failed Reason

Failed to install dependency package :
------------------------------------------------
==> Warning: config:terminal_title has been replaced by install_status and is ignored
==> Warning: Failed to initialize repository: '$spack/var/spack/repos/local'.
No repo.yaml found in '$spack/var/spack/repos/local'
To remove the bad repository, run this command:
spack repo rm $spack/var/spack/repos/local
[+] /usr (external bzip2-1.0.6-r4iabrte3nd5eemcd5v5coc3kvsnoyzu)
[+] /usr (external xz-5.2.4-l5cq5xund4a2b3ikazvehpmbiao6srbv)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/zlib-ng-2.1.4-m4nsqgrityww4eqljits3svzi4wynus3
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/zstd-1.5.5-o7dcxyae4kjgruht44yuloa27ddisxfe
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libiconv-1.17-nh4rfr3f3pcowrx2xcn2l45yyfy3xzk6
[+] /opt/FJSVxtclanga/tcsds-mpi-latest (external fujitsu-mpi-head-3njd5uwuazr4j2no6fqh4cpjmezknh3z)
[+] /opt/FJSVxtclanga/tcsds-ssl2-latest (external fujitsu-ssl2-head-7eif42hdxt2tixz7cufiyhj62kz3jntb)
[+] /usr (external gmake-4.2.1-eszqmok6vi6wxcmklx6bqloeidbh25kb)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/gnuconfig-2022-09-17-w33oejhx46ex2iql4orzjqdmt2kdqdb2
[+] /usr (external pkgconf-1.4.2-mmjuloqcob6vnd6bylwgum67waaa3kht)
[+] /usr (external perl-5.26.3-rkgbbov2pluaat3kknhtag5ui3vltkqk)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/boost-1.83.0-fpdkui6yha674j4vqmienjpxohh6fwrs
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/doxygen-1.9.6-gfyvxy6rdccyi4ldjsc2po4g6hucdfcg
==> Installing libszip-2.1.1-eip744y2aqpmmkbrzmimrsvnxqn5iwo7 [14/17]
==> No binary for libszip-2.1.1-eip744y2aqpmmkbrzmimrsvnxqn5iwo7 found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/21/21ee958b4f2d4be2c9cabfa5e1a94877043609ce86fde5f286f105f7ff84d412.tar.gz
==> No patches needed for libszip
==> libszip: Executing phase: 'autoreconf'
==> libszip: Executing phase: 'configure'
==> libszip: Executing phase: 'build'
==> libszip: Executing phase: 'install'
==> libszip: Successfully installed libszip-2.1.1-eip744y2aqpmmkbrzmimrsvnxqn5iwo7
Stage: 3.84s. Autoreconf: 0.86s. Configure: 47.84s. Build: 37.44s. Install: 0.84s. Post-install: 0.84s. Total: 1m 32.52s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libszip-2.1.1-eip744y2aqpmmkbrzmimrsvnxqn5iwo7
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/hdf5-1.14.3-qyemvkveh5ldexwnl2xrex2gtauttyvc
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/graphviz-8.0.5-m4fjn2rwfxci2hzesgid2cjur5omirqe
==> Installing librom-develop-nypiqkeelmcjaa4ylwz4vxq4ocmwo7uc [17/17]
==> No binary for librom-develop-nypiqkeelmcjaa4ylwz4vxq4ocmwo7uc found: installing from source
==> No patches needed for librom
==> librom: Executing phase: 'autoreconf'
==> Error: RuntimeError: Cannot generate configure: missing dependencies: autoconf, automake, libtool.

Please add the following lines to the package:

depends_on("autoconf", type="build", when="@develop build_system=autotools")
depends_on("automake", type="build", when="@develop build_system=autotools")
depends_on("libtool", type="build", when="@develop build_system=autotools")

Update the version (when="@develop") as needed.

/vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/lib/spack/spack/build_systems/autotools.py:548, in autoreconf:
545 ensure_build_dependencies_or_raise(
546 spec=spec,
547 dependencies=["autoconf", "automake", "libtool"],
>> 548 error_msg="Cannot generate configure",
549 )
550
551 tty.msg("Configure script not found: trying to generate it")

See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-librom-develop-nypiqkeelmcjaa4ylwz4vxq4ocmwo7uc/spack-build-out.txt


<= Back to list