List of Open Source Software which can be built on Fugaku

Spack logo
Spack will be used to manage open source software packages on Fugaku. Fugaku users can easily use pre-installed packages and built packages based on Spack recipes. The following list shows the results of building/compiling packages for aarch64 according to the Spack recipes. Note that the results in this list do not guarantee that each package will work properly. On the other hand, Fujitsu will provide the following packages compiled with Fujitsu compiler on Fugaku as "external" packages, of which Spack can be aware.
  • OpenJDK 11
  • Ruby 2.6.5 or later
  • Python2 2.7.15
  • Python3 3.6.8
  • Numpy 1.14.3
  • SciPy 1.0.0
  • Eclipse IDE 2019-09 R Packages
Please contact us from email:

logrotate 3.21.0

Compiler Fujitsu Compiler Fujitsu C/C++ Compiler 4.10.0 tcsds-1.2.38
Result Dependency Error

Failed Reason

Failed to install dependency package :
------------------------------------------------
==> Warning: config:terminal_title has been replaced by install_status and is ignored
==> Warning: Failed to initialize repository: '$spack/var/spack/repos/local'.
No repo.yaml found in '$spack/var/spack/repos/local'
To remove the bad repository, run this command:
spack repo rm $spack/var/spack/repos/local
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/attr-2.4.48-jjztsq7nzhj5s7no3oero5s2fj6bbdqx
[+] /usr (external gettext-0.19.8.1-6jl23wn6jpwquhvqibpwhvia7vxsgrq3)
[+] /usr (external autoconf-2.69-titfazaulrbnqxmahzxzof53lmsnabip)
[+] /usr (external automake-1.16.1-fryterkxezzfuo7itm4kijqfnazo5uk4)
[+] /usr (external gmake-4.2.1-eszqmok6vi6wxcmklx6bqloeidbh25kb)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/gnuconfig-2022-09-17-w33oejhx46ex2iql4orzjqdmt2kdqdb2
[+] /usr (external libtool-2.4.6-c63win5txkc7eap5ppbbjjoaqyj5i6wx)
[+] /usr (external m4-1.4.18-craoyd3hmfdcanz7zxglna5yxcvdtoem)
[+] /usr (external popt-1.18-ojgizmyrlxs7e6lski3lntrfttrkz7qi)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/acl-2.2.53-dow3yv64lb7rcetkutsh4rdkbcigwsmk
==> Installing logrotate-3.21.0-irbmtwzjbnxf7t6f2ctw3jotyubg7x7j [11/11]
==> No binary for logrotate-3.21.0-irbmtwzjbnxf7t6f2ctw3jotyubg7x7j found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/7f/7f58d6ab7e4eab3403528a88d3747a91b03e83e866a8fb966551016e0df527bb.tar.gz
==> No patches needed for logrotate
==> logrotate: Executing phase: 'autoreconf'
==> logrotate: Executing phase: 'configure'
==> logrotate: Executing phase: 'build'
==> Error: ProcessError: Command exited with status 2:
'make' '-j16' 'V=1'

8 errors found in build log:
10 autoreconf: running: aclocal --force
11 autoreconf: configure.ac: tracing
12 autoreconf: configure.ac: not using Libtool
13 autoreconf: running: /usr/bin/autoconf --force
14 autoreconf: running: /usr/bin/autoheader --force
15 autoreconf: running: automake --add-missing --copy --force-missing
>> 16 configure.ac:13: installing './compile'
>> 17 configure.ac:19: installing './config.guess'
>> 18 configure.ac:19: installing './config.sub'
>> 19 configure.ac:6: installing './install-sh'
>> 20 configure.ac:6: installing './missing'
21 Makefile.am: installing './depcomp'
22 parallel-tests: installing './test-driver'
23 autoreconf: Leaving directory `.'
24 ==> [2024-03-25-23:41:12.801606] Find (recursive): /data/rccs-sdt/a
01008/tmpdir/spack-stage/spack-stage-logrotate-3.21.0-irbmtwzjbnxf7
t6f2ctw3jotyubg7x7j ['config.sub', 'config.guess']
25 ==> [2024-03-25-23:41:12.897154] Find complete: /data/rccs-sdt/a010
08/tmpdir/spack-stage/spack-stage-logrotate-3.21.0-irbmtwzjbnxf7t6f
2ctw3jotyubg7x7j ['config.sub', 'config.guess']
26 ==> logrotate: Executing phase: 'configure'

...

342 ln: '/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-logrotate
-3.21.0-irbmtwzjbnxf7t6f2ctw3jotyubg7x7j/spack-src/test/test-config
.90.in' and './test-config.90.in' are the same file
343 ln: '/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-logrotate
-3.21.0-irbmtwzjbnxf7t6f2ctw3jotyubg7x7j/spack-src/test/test-config
.91.in' and './test-config.91.in' are the same file
344 ln: '/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-logrotate
-3.21.0-irbmtwzjbnxf7t6f2ctw3jotyubg7x7j/spack-src/test/test-config
.92.in' and './test-config.92.in' are the same file
345 ln: '/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-logrotate
-3.21.0-irbmtwzjbnxf7t6f2ctw3jotyubg7x7j/spack-src/test/test-config
.93.in' and './test-config.93.in' are the same file
346 ln: '/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-logrotate
-3.21.0-irbmtwzjbnxf7t6f2ctw3jotyubg7x7j/spack-src/test/test.ACL' a
nd './test.ACL' are the same file
347 ln: '/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-logrotate
-3.21.0-irbmtwzjbnxf7t6f2ctw3jotyubg7x7j/spack-src/test/test.SELINU
X' and './test.SELINUX' are the same file
>> 348 make[2]: *** [Makefile:1621: all] Error 1
349 make[2]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/sp
ack-stage/spack-stage-logrotate-3.21.0-irbmtwzjbnxf7t6f2ctw3jotyubg
7x7j/spack-src/test'
>> 350 make[1]: *** [Makefile:636: all-recursive] Error 1
351 make[1]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/sp
ack-stage/spack-stage-logrotate-3.21.0-irbmtwzjbnxf7t6f2ctw3jotyubg
7x7j/spack-src'
>> 352 make: *** [Makefile:394: all] Error 2

See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-logrotate-3.21.0-irbmtwzjbnxf7t6f2ctw3jotyubg7x7j/spack-build-out.txt


<= Back to list