Spack will be used to manage open source software packages on Fugaku.
Fugaku users can easily use pre-installed packages and built packages based on Spack recipes.
The following list shows the results of building/compiling packages for aarch64 according to the Spack recipes.
Note that the results in this list do not guarantee that each package will work properly.
On the other hand, Fujitsu will provide the following packages compiled with Fujitsu compiler on Fugaku as "external" packages, of which Spack can be aware.
![]() |
Compiler | Fujitsu Compiler Fujitsu C/C++ Compiler 4.10.0 tcsds-1.2.38 |
---|---|
Result | Dependency Error |
Failed to install dependency package :
------------------------------------------------
==> Warning: config:terminal_title has been replaced by install_status and is ignored
==> Warning: Failed to initialize repository: '$spack/var/spack/repos/local'.
No repo.yaml found in '$spack/var/spack/repos/local'
To remove the bad repository, run this command:
spack repo rm $spack/var/spack/repos/local
[+] /usr (external autoconf-2.69-titfazaulrbnqxmahzxzof53lmsnabip)
[+] /usr (external automake-1.16.1-fryterkxezzfuo7itm4kijqfnazo5uk4)
[+] /usr (external gmake-4.2.1-eszqmok6vi6wxcmklx6bqloeidbh25kb)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/gnuconfig-2022-09-17-w33oejhx46ex2iql4orzjqdmt2kdqdb2
[+] /usr (external libtool-2.4.6-c63win5txkc7eap5ppbbjjoaqyj5i6wx)
[+] /usr (external m4-1.4.18-craoyd3hmfdcanz7zxglna5yxcvdtoem)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/zlib-ng-2.1.4-m4nsqgrityww4eqljits3svzi4wynus3
==> Installing migrate-3.6.11-nfhdaggouz3fdo6atsyimfqyvxfz3uj7 [8/8]
==> No binary for migrate-3.6.11-nfhdaggouz3fdo6atsyimfqyvxfz3uj7 found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/a9/a9ba06a4e995a45b8d04037f5f2da23e1fe64a2f3565189bdd50c62c6fe01fb8.tar.gz
==> No patches needed for migrate
==> migrate: Executing phase: 'autoreconf'
==> migrate: Executing phase: 'configure'
==> migrate: Executing phase: 'build'
==> Error: ProcessError: Command exited with status 2:
'make' '-j16'
4 errors found in build log:
250 /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/lib
/spack/env/fj/fcc -g -O2 -DNEXUSTREE -DHAVE_ZLIB -DZNZ -DHIGHBIT
S -DHAVE_CONFIG_H -DHAVE_MALLOCWRAP -DMERSENNE_TWISTER -DMEXP=19937
-DMIGRATESUBVERSION="\"June-18-15\"" -DMIGRATEVERSION="\"3.6.11
\"" -DNOJPEG -DNOPNG -Iharu -DPRETTY -DLETTERPAPER -c histogram
.c
251 /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/lib
/spack/env/fj/fcc -g -O2 -DNEXUSTREE -DHAVE_ZLIB -DZNZ -DHIGHBIT
S -DHAVE_CONFIG_H -DHAVE_MALLOCWRAP -DMERSENNE_TWISTER -DMEXP=19937
-DMIGRATESUBVERSION="\"June-18-15\"" -DMIGRATEVERSION="\"3.6.11
\"" -DNOJPEG -DNOPNG -Iharu -DPRETTY -DLETTERPAPER -c inthp.c
252 /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/lib
/spack/env/fj/fcc -g -O2 -DNEXUSTREE -DHAVE_ZLIB -DZNZ -DHIGHBIT
S -DHAVE_CONFIG_H -DHAVE_MALLOCWRAP -DMERSENNE_TWISTER -DMEXP=19937
-DMIGRATESUBVERSION="\"June-18-15\"" -DMIGRATEVERSION="\"3.6.11
\"" -DNOJPEG -DNOPNG -Iharu -DPRETTY -DLETTERPAPER -c joint-cha
ins.c
253 /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/lib
/spack/env/fj/fcc -g -O2 -DNEXUSTREE -DHAVE_ZLIB -DZNZ -DHIGHBIT
S -DHAVE_CONFIG_H -DHAVE_MALLOCWRAP -DMERSENNE_TWISTER -DMEXP=19937
-DMIGRATESUBVERSION="\"June-18-15\"" -DMIGRATEVERSION="\"3.6.11
\"" -DNOJPEG -DNOPNG -Iharu -DPRETTY -DLETTERPAPER -c laguerre.
c
254 /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/lib
/spack/env/fj/fcc -g -O2 -DNEXUSTREE -DHAVE_ZLIB -DZNZ -DHIGHBIT
S -DHAVE_CONFIG_H -DHAVE_MALLOCWRAP -DMERSENNE_TWISTER -DMEXP=19937
-DMIGRATESUBVERSION="\"June-18-15\"" -DMIGRATEVERSION="\"3.6.11
\"" -DNOJPEG -DNOPNG -Iharu -DPRETTY -DLETTERPAPER -c lrt.c
255 /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/lib
/spack/env/fj/fcc -g -O2 -DNEXUSTREE -DHAVE_ZLIB -DZNZ -DHIGHBIT
S -DHAVE_CONFIG_H -DHAVE_MALLOCWRAP -DMERSENNE_TWISTER -DMEXP=19937
-DMIGRATESUBVERSION="\"June-18-15\"" -DMIGRATEVERSION="\"3.6.11
\"" -DNOJPEG -DNOPNG -Iharu -DPRETTY -DLETTERPAPER -c main.c
>> 256 data.c:57:10: fatal error: 'xlocale.h' file not found
257 #include <xlocale.h>
258 ^~~~~~~~~~~
259 1 error generated.
>> 260 make[2]: *** [Makefile:182: data.o] Error 1
261 make[2]: *** Waiting for unfinished jobs....
262 histogram.c:58:58: warning: result of comparison of constant -1 wit
h expression of type 'char' is always true [-Wtautological-constant
-out-of-range-compare]
263 while(done==FALSE && ZNZFGETS(input,LINESIZE,mdimfile) != EOF)
264 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~
265 histogram.c:244:52: warning: result of comparison of constant -1 wi
th expression of type 'char' is always true [-Wtautological-constan
t-out-of-range-compare]
266 while(ZNZFGETS(input,SUPERLINESIZE,mdimfile) != EOF)
267 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~
268 2 warnings generated.
269 make[2]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/sp
ack-stage/spack-stage-migrate-3.6.11-nfhdaggouz3fdo6atsyimfqyvxfz3u
j7/spack-src/src'
>> 270 make[1]: *** [Makefile:225: all] Error 2
271 make[1]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/sp
ack-stage/spack-stage-migrate-3.6.11-nfhdaggouz3fdo6atsyimfqyvxfz3u
j7/spack-src/src'
>> 272 make: *** [Makefile:201: intro] Error 2
See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-migrate-3.6.11-nfhdaggouz3fdo6atsyimfqyvxfz3uj7/spack-build-out.txt