List of Open Source Software which can be built on Fugaku

Spack logo
Spack will be used to manage open source software packages on Fugaku. Fugaku users can easily use pre-installed packages and built packages based on Spack recipes. The following list shows the results of building/compiling packages for aarch64 according to the Spack recipes. Note that the results in this list do not guarantee that each package will work properly. On the other hand, Fujitsu will provide the following packages compiled with Fujitsu compiler on Fugaku as "external" packages, of which Spack can be aware.
  • OpenJDK 11
  • Ruby 2.6.5 or later
  • Python2 2.7.15
  • Python3 3.6.8
  • Numpy 1.14.3
  • SciPy 1.0.0
  • Eclipse IDE 2019-09 R Packages
Please contact us from email:

minigan 1.0.0

Compiler Fujitsu Compiler Fujitsu C/C++ Compiler 4.10.0 tcsds-1.2.38
Result Dependency Error

Failed Reason

Failed to install dependency package :
------------------------------------------------
ote, this may be up to 100x slower for some linear algebra operation
s).
71
72 A full log can be found at /vol0003/rccs-sdt/data/a01008/tmpdir/sp
ack-stage/spack-stage-py-numpy-1.26.1-lfjg3fewnwt3u4cqwndtt7mluq3bz7
yw/spack-src/build/meson-logs/meson-log.txt
73 error: subprocess-exited-with-error
74
75 × Preparing metadata (pyproject.toml) did not run successfully.
76 │ exit code: 1
77 ╰─> See above for output.
78
79 note: This error originates from a subprocess, and is likely not a
problem with pip.
80 full command: /vol0004/apps/oss/spack-v0.19/opt/spack/linux-rhel8-
a64fx/fj-4.8.1/python-3.10.8-7q66snjvhvy7im57hncbgpirmddrb5sk/bin/py
thon3.10 /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/s
pack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-pip-23.1.2-e5mqkkojghz
4zpl6zboxzql3mko55ccd/lib/python3.10/site-packages/pip/_vendor/pypro
ject_hooks/_in_process/_in_process.py prepare_metadata_for_build_whe
el /data/rccs-sdt/a01008/tmpdir/tmpa6611bog
81 cwd: /vol0003/rccs-sdt/data/a01008/tmpdir/spack-stage/spack-stage-
py-numpy-1.26.1-lfjg3fewnwt3u4cqwndtt7mluq3bz7yw/spack-src
82 Preparing metadata (pyproject.toml): finished with status 'error'
>> 83 error: metadata-generation-failed
84
85 × Encountered error while generating package metadata.
86 ╰─> See above for output.
87
88 note: This is an issue with the package mentioned above, not pip.
89 hint: See above for details.

See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-py-numpy-1.26.1-lfjg3fewnwt3u4cqwndtt7mluq3bz7yw/spack-build-out.txt

==> Warning: Skipping build of py-torchmetrics-1.2.0-eryvgv4zhjvh2o5uarqx7svj53tgc2o2 since py-numpy-1.26.1-lfjg3fewnwt3u4cqwndtt7mluq3bz7yw failed
==> Warning: Skipping build of py-pytorch-lightning-1.5.3-cjcexklvi46efjtd5dftl5qpxhmprir3 since py-torchmetrics-1.2.0-eryvgv4zhjvh2o5uarqx7svj53tgc2o2 failed
==> Warning: Skipping build of py-horovod-master-tgrmcqxoanqdol2olguuggfd4tjgxqzr since py-pytorch-lightning-1.5.3-cjcexklvi46efjtd5dftl5qpxhmprir3 failed
==> Warning: Skipping build of minigan-1.0.0-svyiwx3nxfv7e5typycygbw4m3stl6ym since py-horovod-master-tgrmcqxoanqdol2olguuggfd4tjgxqzr failed
==> Warning: Skipping build of py-torch-2.0.1-kxgs4wbcc4jfn6pgo527v2mcntgd2kdi since py-numpy-1.26.1-lfjg3fewnwt3u4cqwndtt7mluq3bz7yw failed
==> Warning: Skipping build of py-torchvision-0.15.2-2k7qrxif6qnkrpsj4wcc6dtesuzwegp4 since py-torch-2.0.1-kxgs4wbcc4jfn6pgo527v2mcntgd2kdi failed
==> Warning: Skipping build of py-matplotlib-3.0.0-f53hpddexi47pkceyz2agexd2e77spft since py-numpy-1.26.1-lfjg3fewnwt3u4cqwndtt7mluq3bz7yw failed
==> Warning: Skipping build of py-tensorboard-2.14.1-mql3dgdgeg3xjmrm2sgr2kf7glxvyhir since py-numpy-1.26.1-lfjg3fewnwt3u4cqwndtt7mluq3bz7yw failed
==> Installing py-pyasn1-modules-0.2.8-ct7gsi7nkxci4g6j5olorvqwfsbj7cb7 [88/104]
==> No binary for py-pyasn1-modules-0.2.8-ct7gsi7nkxci4g6j5olorvqwfsbj7cb7 found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/90/905f84c712230b2c592c19470d3ca8d552de726050d1d1716282a1f6146be65e.tar.gz
==> No patches needed for py-pyasn1-modules
==> py-pyasn1-modules: Executing phase: 'install'
==> py-pyasn1-modules: Successfully installed py-pyasn1-modules-0.2.8-ct7gsi7nkxci4g6j5olorvqwfsbj7cb7
Stage: 8.76s. Install: 30.62s. Post-install: 2.54s. Total: 42.91s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-pyasn1-modules-0.2.8-ct7gsi7nkxci4g6j5olorvqwfsbj7cb7
==> Installing py-rsa-4.9-ymc7y3oy73eechoq5saxkxgl2b35puxx [89/104]
==> No binary for py-rsa-4.9-ymc7y3oy73eechoq5saxkxgl2b35puxx found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/e3/e38464a49c6c85d7f1351b0126661487a7e0a14a50f1675ec50eb34d4f20ef21.tar.gz
==> No patches needed for py-rsa
==> py-rsa: Executing phase: 'install'
==> py-rsa: Successfully installed py-rsa-4.9-ymc7y3oy73eechoq5saxkxgl2b35puxx
Stage: 2.04s. Install: 20.80s. Post-install: 1.19s. Total: 24.92s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-rsa-4.9-ymc7y3oy73eechoq5saxkxgl2b35puxx
==> Installing rust-1.70.0-ubxslwjeh7ejoriyr4gjqofebj67ysnv [90/104]
==> No binary for rust-1.70.0-ubxslwjeh7ejoriyr4gjqofebj67ysnv found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/b2/b2bfae000b7a5040e4ec4bbc50a09f21548190cb7570b0ed77358368413bd27c.tar.gz
==> No patches needed for rust
==> rust: Executing phase: 'configure'
==> rust: Executing phase: 'build'
==> Error: ProcessError: Command exited with status 1:
'/vol0004/apps/oss/spack-v0.19/opt/spack/linux-rhel8-a64fx/fj-4.8.1/python-3.10.8-7q66snjvhvy7im57hncbgpirmddrb5sk/bin/python3.10' './x.py' 'build'

2 errors found in build log:
16 configure:
17 configure: run `python /vol0003/rccs-sdt/data/a01008/tmpdir/spack-st
age/spack-stage-rust-1.70.0-ubxslwjeh7ejoriyr4gjqofebj67ysnv/spack-s
rc/x.py --help`
18 ==> rust: Executing phase: 'build'
19 ==> [2024-03-27-15:29:29.549977] '/vol0004/apps/oss/spack-v0.19/opt/
spack/linux-rhel8-a64fx/fj-4.8.1/python-3.10.8-7q66snjvhvy7im57hncbg
pirmddrb5sk/bin/python3.10' './x.py' 'build'
20 Building bootstrap
21 Updating crates.io index
>> 22 error: failed to get `cc` as a dependency of package `bootstrap v0.0
.0 (/vol0003/rccs-sdt/data/a01008/tmpdir/spack-stage/spack-stage-rus
t-1.70.0-ubxslwjeh7ejoriyr4gjqofebj67ysnv/spack-src/src/bootstrap)`
23
24 Caused by:
25 failed to query replaced source registry `crates-io`
26
27 Caused by:
28 download of config.json failed
29
30 Caused by:
31 failed to download from `https://index.crates.io/config.json`
32
33 Caused by:
34 [77] Problem with the SSL CA cert (path? access rights?) (error se
tting certificate verify locations: CAfile: /usr/etc/openssl/cert.p
em CApath: /etc/pki/tls/certs)
>> 35 failed to run: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-2024
0227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/rust-bootstrap-1.70
.0-h26mnsxcbcxyo4whfqraw7fgbjcjw5id/bin/cargo build --manifest-path
/vol0003/rccs-sdt/data/a01008/tmpdir/spack-stage/spack-stage-rust-1.
70.0-ubxslwjeh7ejoriyr4gjqofebj67ysnv/spack-src/src/bootstrap/Cargo.
toml
36 Build completed unsuccessfully in 0:00:02

See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-rust-1.70.0-ubxslwjeh7ejoriyr4gjqofebj67ysnv/spack-build-out.txt

==> Warning: Skipping build of py-tensorboard-data-server-0.7.0-bxr6l5xsw6glzocfy45chxgv543pv4n4 since rust-1.70.0-ubxslwjeh7ejoriyr4gjqofebj67ysnv failed
==> Installing py-requests-oauthlib-1.3.1-onml2shpi4idv5fdj7aoem5tl3ywj6ez [91/104]
==> No binary for py-requests-oauthlib-1.3.1-onml2shpi4idv5fdj7aoem5tl3ywj6ez found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/75/75beac4a47881eeb94d5ea5d6ad31ef88856affe2332b9aafb52c6452ccf0d7a.tar.gz
==> No patches needed for py-requests-oauthlib
==> py-requests-oauthlib: Executing phase: 'install'
==> py-requests-oauthlib: Successfully installed py-requests-oauthlib-1.3.1-onml2shpi4idv5fdj7aoem5tl3ywj6ez
Stage: 2.91s. Install: 33.06s. Post-install: 3.13s. Total: 47.92s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-requests-oauthlib-1.3.1-onml2shpi4idv5fdj7aoem5tl3ywj6ez
==> Installing py-aiohttp-3.8.4-w5d6udmssbdo5ctn6n6j4tyx3sthcijt [92/104]
==> No binary for py-aiohttp-3.8.4-w5d6udmssbdo5ctn6n6j4tyx3sthcijt found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/bf/bf2e1a9162c1e441bf805a1fd166e249d574ca04e03b34f97e2928769e91ab5c.tar.gz
==> No patches needed for py-aiohttp
==> py-aiohttp: Executing phase: 'install'
==> py-aiohttp: Successfully installed py-aiohttp-3.8.4-w5d6udmssbdo5ctn6n6j4tyx3sthcijt
Stage: 12.16s. Install: 1m 29.30s. Post-install: 3.92s. Total: 1m 52.34s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-aiohttp-3.8.4-w5d6udmssbdo5ctn6n6j4tyx3sthcijt
==> Installing py-google-auth-2.16.2-emgaffhyd4ezeuuy6ccvgsjpnzhxnqeb [93/104]
==> No binary for py-google-auth-2.16.2-emgaffhyd4ezeuuy6ccvgsjpnzhxnqeb found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/07/07e14f34ec288e3f33e00e2e3cc40c8942aa5d4ceac06256a28cd8e786591420.tar.gz
==> No patches needed for py-google-auth
==> py-google-auth: Executing phase: 'install'
==> py-google-auth: Successfully installed py-google-auth-2.16.2-emgaffhyd4ezeuuy6ccvgsjpnzhxnqeb
Stage: 5.20s. Install: 25.58s. Post-install: 2.85s. Total: 35.20s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-google-auth-2.16.2-emgaffhyd4ezeuuy6ccvgsjpnzhxnqeb
==> Installing py-fsspec-2023.1.0-cu244vle3cnelvovfphcc5zgdwpbmg2i [94/104]
==> No binary for py-fsspec-2023.1.0-cu244vle3cnelvovfphcc5zgdwpbmg2i found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/fb/fbae7f20ff801eb5f7d0bedf81f25c787c0dfac5e982d98fa3884a9cde2b5411.tar.gz
==> No patches needed for py-fsspec
==> py-fsspec: Executing phase: 'install'
==> py-fsspec: Successfully installed py-fsspec-2023.1.0-cu244vle3cnelvovfphcc5zgdwpbmg2i
Stage: 1.39s. Install: 22.27s. Post-install: 4.24s. Total: 35.07s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-fsspec-2023.1.0-cu244vle3cnelvovfphcc5zgdwpbmg2i
==> Installing py-google-auth-oauthlib-0.5.2-k5yqtppg6dpkzhxmu6ecjw4e7ylifwvk [95/104]
==> No binary for py-google-auth-oauthlib-0.5.2-k5yqtppg6dpkzhxmu6ecjw4e7ylifwvk found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/d5/d5e98a71203330699f92a26bc08847a92e8c3b1b8d82a021f1af34164db143ae.tar.gz
==> No patches needed for py-google-auth-oauthlib
==> py-google-auth-oauthlib: Executing phase: 'install'
==> py-google-auth-oauthlib: Successfully installed py-google-auth-oauthlib-0.5.2-k5yqtppg6dpkzhxmu6ecjw4e7ylifwvk
Stage: 2.32s. Install: 17.96s. Post-install: 3.39s. Total: 29.38s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-google-auth-oauthlib-0.5.2-k5yqtppg6dpkzhxmu6ecjw4e7ylifwvk
==> Error: minigan-1.0.0-svyiwx3nxfv7e5typycygbw4m3stl6ym: Package was not installed
==> Error: Installation request failed. Refer to reported errors for failing package(s).


<= Back to list