List of Open Source Software which can be built on Fugaku

Spack logo
Spack will be used to manage open source software packages on Fugaku. Fugaku users can easily use pre-installed packages and built packages based on Spack recipes. The following list shows the results of building/compiling packages for aarch64 according to the Spack recipes. Note that the results in this list do not guarantee that each package will work properly. On the other hand, Fujitsu will provide the following packages compiled with Fujitsu compiler on Fugaku as "external" packages, of which Spack can be aware.
  • OpenJDK 11
  • Ruby 2.6.5 or later
  • Python2 2.7.15
  • Python3 3.6.8
  • Numpy 1.14.3
  • SciPy 1.0.0
  • Eclipse IDE 2019-09 R Packages
Please contact us from email:

nix 2.3.15

Compiler Fujitsu Compiler Fujitsu C/C++ Compiler 4.10.0 tcsds-1.2.38
Result Dependency Error

Failed Reason

Failed to install dependency package :
------------------------------------------------
==> Warning: config:terminal_title has been replaced by install_status and is ignored
==> Warning: Failed to initialize repository: '$spack/var/spack/repos/local'.
No repo.yaml found in '$spack/var/spack/repos/local'
To remove the bad repository, run this command:
spack repo rm $spack/var/spack/repos/local
==> Warning: using "openssl@1.1.1k" which is a deprecated version
[+] /usr (external autoconf-2.69-titfazaulrbnqxmahzxzof53lmsnabip)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/autoconf-archive-2023.02.20-ydfg24m4mavgqw27wkxnqyulcczlalqd
[+] /usr (external automake-1.16.1-fryterkxezzfuo7itm4kijqfnazo5uk4)
[+] /usr (external gettext-0.19.8.1-6jl23wn6jpwquhvqibpwhvia7vxsgrq3)
[+] /usr (external m4-1.4.18-craoyd3hmfdcanz7zxglna5yxcvdtoem)
[+] /usr (external bzip2-1.0.6-r4iabrte3nd5eemcd5v5coc3kvsnoyzu)
[+] /usr (external xz-5.2.4-l5cq5xund4a2b3ikazvehpmbiao6srbv)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/zlib-ng-2.1.4-m4nsqgrityww4eqljits3svzi4wynus3
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/zstd-1.5.5-o7dcxyae4kjgruht44yuloa27ddisxfe
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/brotli-1.0.9-oazcwsrzl4gjuiunob7liqwwu2d2cdcm
[+] /usr (external curl-7.61.1-qsvgylcys5hkzdnl2pdh4blrprxlsp5m)
[+] /usr (external ncurses-6.1-a6lc7oq2dlgphtibbpp6x72mqgmscros)
[+] /usr (external gmake-4.2.1-eszqmok6vi6wxcmklx6bqloeidbh25kb)
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/gnuconfig-2022-09-17-w33oejhx46ex2iql4orzjqdmt2kdqdb2
[+] /vol0004/apps/oss/spack-v0.19/opt/spack/linux-rhel8-a64fx/fj-4.8.1/python-3.10.8-7q66snjvhvy7im57hncbgpirmddrb5sk (external python-3.10.8-zcbuy6dnhwhmsrco46b6ayaywy4nrfcy)
[+] /usr (external libtool-2.4.6-c63win5txkc7eap5ppbbjjoaqyj5i6wx)
[+] /usr (external openssl-1.1.1k-bprmjv6lxavt4jwalf6ucpmia7oubuqp)
[+] /usr (external pkgconf-1.4.2-mmjuloqcob6vnd6bylwgum67waaa3kht)
[+] /usr (external sqlite-3.26.0-mk7hngumxevy3u6wqoaco5sgzevallwn)
==> Installing boost-1.83.0-sf4mgwjha2j6trkwqp4noa3wmefsjs24 [20/29]
==> No binary for boost-1.83.0-sf4mgwjha2j6trkwqp4noa3wmefsjs24 found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/64/6478edfe2f3305127cffe8caf73ea0176c53769f4bf1585be237eb30798c3b8e.tar.bz2
==> Applied patch /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/repos/builtin/packages/boost/fujitsu_version_analysis-1.77.patch
==> Applied patch /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/repos/builtin/packages/boost/bootstrap-compiler.patch
==> Ran patch() for boost
==> boost: Executing phase: 'install'
==> boost: Successfully installed boost-1.83.0-sf4mgwjha2j6trkwqp4noa3wmefsjs24
Stage: 39m 54.07s. Install: 41m 48.51s. Post-install: 13m 49.35s. Total: 1h 35m 40.20s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/boost-1.83.0-sf4mgwjha2j6trkwqp4noa3wmefsjs24
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/gperf-3.1-p5s5xalk6cmrycwow7gnlgy5np435ybb
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/flex-2.6.3-udlfzibabfli2hc4lyhfxk7p5xd3pv4f
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/libsodium-1.0.18-jmecq4c2pwrirey4q3s7n3pieieh32wn
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/bison-3.8.2-kviw7pt3aorzqonkoy2vxqd5nzod5xdv
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-setuptools-68.0.0-umhokgnekqyzlgjhl6pifea67uvzwnge
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/editline-1.17.1-7scbh25pqvwghw6osgzby5kjk3id7ros
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-cython-3.0.4-7sdgkmtvjntri7top7bfm2hd5u7drmyc
==> Installing libseccomp-2.5.4-6vzstere6lk7uj65bb4bm2vfregkllyp [28/29]
==> No binary for libseccomp-2.5.4-6vzstere6lk7uj65bb4bm2vfregkllyp found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/d8/d82902400405cf0068574ef3dc1fe5f5926207543ba1ae6f8e7a1576351dcbdb.tar.gz
==> No patches needed for libseccomp
==> libseccomp: Executing phase: 'autoreconf'
==> libseccomp: Executing phase: 'configure'
==> libseccomp: Executing phase: 'build'
==> Error: ProcessError: Command exited with status 2:
'make' '-j16' 'V=1'

4 errors found in build log:
249 libtool: link: ( cd ".libs" && rm -f "libseccomp.la" && ln -s "../l
ibseccomp.la" "libseccomp.la" )
250 make[3]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/sp
ack-stage/spack-stage-libseccomp-2.5.4-6vzstere6lk7uj65bb4bm2vfregk
llyp/spack-src/src'
251 Making all in python
252 make[3]: Entering directory '/vol0003/rccs-sdt/data/a01008/tmpdir/s
pack-stage/spack-stage-libseccomp-2.5.4-6vzstere6lk7uj65bb4bm2vfreg
kllyp/spack-src/src/python'
253 [ /data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-libseccomp-2
.5.4-6vzstere6lk7uj65bb4bm2vfregkllyp/spack-src/src/python == . ] |
| cp /data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-libseccom
p-2.5.4-6vzstere6lk7uj65bb4bm2vfregkllyp/spack-src/src/python/secco
mp.pyx .
254 cp: '/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-libseccom
p-2.5.4-6vzstere6lk7uj65bb4bm2vfregkllyp/spack-src/src/python/secco
mp.pyx' and './seccomp.pyx' are the same file
>> 255 make[3]: *** [Makefile:500: build] Error 1
256 make[3]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/sp
ack-stage/spack-stage-libseccomp-2.5.4-6vzstere6lk7uj65bb4bm2vfregk
llyp/spack-src/src/python'
>> 257 make[2]: *** [Makefile:897: all-recursive] Error 1
258 make[2]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/sp
ack-stage/spack-stage-libseccomp-2.5.4-6vzstere6lk7uj65bb4bm2vfregk
llyp/spack-src/src'
>> 259 make[1]: *** [Makefile:522: all-recursive] Error 1
260 make[1]: Leaving directory '/vol0003/rccs-sdt/data/a01008/tmpdir/sp
ack-stage/spack-stage-libseccomp-2.5.4-6vzstere6lk7uj65bb4bm2vfregk
llyp/spack-src'
>> 261 make: *** [Makefile:431: all] Error 2

See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-libseccomp-2.5.4-6vzstere6lk7uj65bb4bm2vfregkllyp/spack-build-out.txt

==> Warning: Skipping build of nix-2.3.15-xdunl5lzyvwfbd642u6u3euzccuhyah5 since libseccomp-2.5.4-6vzstere6lk7uj65bb4bm2vfregkllyp failed
==> Error: nix-2.3.15-xdunl5lzyvwfbd642u6u3euzccuhyah5: Package was not installed
==> Error: Installation request failed. Refer to reported errors for failing package(s).


<= Back to list