Spack will be used to manage open source software packages on Fugaku.
Fugaku users can easily use pre-installed packages and built packages based on Spack recipes.
The following list shows the results of building/compiling packages for aarch64 according to the Spack recipes.
Note that the results in this list do not guarantee that each package will work properly.
On the other hand, Fujitsu will provide the following packages compiled with Fujitsu compiler on Fugaku as "external" packages, of which Spack can be aware.
![]() |
Compiler | Fujitsu Compiler Fujitsu C/C++ Compiler 4.10.0 tcsds-1.2.38 |
---|---|
Result | Dependency Error |
Failed to install dependency package :
------------------------------------------------
==> Installing py-libclang-14.0.6-zft2wn7anq4e2bldzkukmknaqifuvzys [131/153]
==> No binary for py-libclang-14.0.6-zft2wn7anq4e2bldzkukmknaqifuvzys found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/36/3666679d9f23270a230a4d4dae49bc48fc2515c272ff5855b2618e23daa50100.tar.gz
==> Ran patch() for py-libclang
==> py-libclang: Executing phase: 'install'
==> py-libclang: Successfully installed py-libclang-14.0.6-zft2wn7anq4e2bldzkukmknaqifuvzys
Stage: 3.23s. Install: 10.48s. Post-install: 1.75s. Total: 20.09s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-libclang-14.0.6-zft2wn7anq4e2bldzkukmknaqifuvzys
==> Installing py-setuptools-scm-7.1.0-tz4veuydujyev2wdycktvngtlg5p6ptl [132/153]
==> No binary for py-setuptools-scm-7.1.0-tz4veuydujyev2wdycktvngtlg5p6ptl found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/6c/6c508345a771aad7d56ebff0e70628bf2b0ec7573762be9960214730de278f27.tar.gz
==> No patches needed for py-setuptools-scm
==> py-setuptools-scm: Executing phase: 'install'
==> py-setuptools-scm: Successfully installed py-setuptools-scm-7.1.0-tz4veuydujyev2wdycktvngtlg5p6ptl
Stage: 2.31s. Install: 18.34s. Post-install: 3.21s. Total: 26.96s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-setuptools-scm-7.1.0-tz4veuydujyev2wdycktvngtlg5p6ptl
==> Installing py-scipy-1.11.3-lmml4ofrq4vkiq726lk6e27linxldxer [133/153]
==> No binary for py-scipy-1.11.3-lmml4ofrq4vkiq726lk6e27linxldxer found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/bb/bba4d955f54edd61899776bad459bf7326e14b9fa1c552181f0479cc60a568cd.tar.gz
==> No patches needed for py-scipy
==> py-scipy: Executing phase: 'install'
==> Error: ProcessError: Command exited with status 1:
'/vol0004/apps/oss/spack-v0.19/opt/spack/linux-rhel8-a64fx/fj-4.8.1/python-3.10.8-7q66snjvhvy7im57hncbgpirmddrb5sk/bin/python3.10' '-m' 'pip' '-vvv' '--no-input' '--no-cache-dir' '--disable-pip-version-check' 'install' '--no-deps' '--ignore-installed' '--no-build-isolation' '--no-warn-script-location' '--no-index' '--prefix=/vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-scipy-1.11.3-lmml4ofrq4vkiq726lk6e27linxldxer' '--config-settings=builddir=build' '--config-settings=compile-args=-j16' '--config-settings=setup-args=-Dblas=fjlapackexsve' '--config-settings=setup-args=-Dlapack=fjlapackexsve' '.'
2 errors found in build log:
48 Compiler for C supports arguments -Wno-unused-but-set-variable: YE
S
49 Compiler for C supports arguments -Wno-unused-function: YES
50 Compiler for C supports arguments -Wno-conversion: YES
51 Compiler for C supports arguments -Wno-misleading-indentation: YES
52 Library m found: YES
53
>> 54 ../meson.build:82:0: ERROR: Unknown compiler(s): [['/vol0003/rccs-sd
t/data/a01008/spack-all-test/env-20240227/spack/lib/spack/env/fj/frt
']]
55
56 A full log can be found at /vol0003/rccs-sdt/data/a01008/tmpdir/sp
ack-stage/spack-stage-py-scipy-1.11.3-lmml4ofrq4vkiq726lk6e27linxldx
er/spack-src/build/meson-logs/meson-log.txt
57 error: subprocess-exited-with-error
58
59 × Preparing metadata (pyproject.toml) did not run successfully.
60 │ exit code: 1
61 ╰─> See above for output.
62
63 note: This error originates from a subprocess, and is likely not a
problem with pip.
64 full command: /vol0004/apps/oss/spack-v0.19/opt/spack/linux-rhel8-
a64fx/fj-4.8.1/python-3.10.8-7q66snjvhvy7im57hncbgpirmddrb5sk/bin/py
thon3.10 /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/s
pack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-pip-23.1.2-e5mqkkojghz
4zpl6zboxzql3mko55ccd/lib/python3.10/site-packages/pip/_vendor/pypro
ject_hooks/_in_process/_in_process.py prepare_metadata_for_build_whe
el /data/rccs-sdt/a01008/tmpdir/tmpzj7w41h1
65 cwd: /vol0003/rccs-sdt/data/a01008/tmpdir/spack-stage/spack-stage-
py-scipy-1.11.3-lmml4ofrq4vkiq726lk6e27linxldxer/spack-src
66 Preparing metadata (pyproject.toml): finished with status 'error'
>> 67 error: metadata-generation-failed
68
69 × Encountered error while generating package metadata.
70 ╰─> See above for output.
71
72 note: This is an issue with the package mentioned above, not pip.
73 hint: See above for details.
See build log for details:
/data/rccs-sdt/a01008/tmpdir/spack-stage/spack-stage-py-scipy-1.11.3-lmml4ofrq4vkiq726lk6e27linxldxer/spack-build-out.txt
==> Installing py-numba-0.57.0-xdr5gjsuy5vjyolnkzlsgryqvd64z4sv [134/153]
==> No binary for py-numba-0.57.0-xdr5gjsuy5vjyolnkzlsgryqvd64z4sv found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/2a/2af6d81067a5bdc13960c6d2519dbabbf4d5d597cf75d640c5aeaefd48c6420a.tar.gz
==> No patches needed for py-numba
==> py-numba: Executing phase: 'install'
==> py-numba: Successfully installed py-numba-0.57.0-xdr5gjsuy5vjyolnkzlsgryqvd64z4sv
Stage: 55.56s. Install: 6m 25.53s. Post-install: 22.46s. Total: 7m 52.74s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-numba-0.57.0-xdr5gjsuy5vjyolnkzlsgryqvd64z4sv
==> Installing py-python-dateutil-2.8.2-cbetdardpsllfyhzw42d5o7wi7kgxyg2 [135/153]
==> No binary for py-python-dateutil-2.8.2-cbetdardpsllfyhzw42d5o7wi7kgxyg2 found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/01/0123cacc1627ae19ddf3c27a5de5bd67ee4586fbdd6440d9748f8abb483d3e86.tar.gz
==> No patches needed for py-python-dateutil
==> py-python-dateutil: Executing phase: 'install'
==> py-python-dateutil: Successfully installed py-python-dateutil-2.8.2-cbetdardpsllfyhzw42d5o7wi7kgxyg2
Stage: 4.28s. Install: 22.71s. Post-install: 2.10s. Total: 32.45s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-python-dateutil-2.8.2-cbetdardpsllfyhzw42d5o7wi7kgxyg2
==> Installing py-pluggy-1.0.0-vrze2gxa77onvs7enpgdh6vicedtckj4 [136/153]
==> No binary for py-pluggy-1.0.0-vrze2gxa77onvs7enpgdh6vicedtckj4 found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/42/4224373bacce55f955a878bf9cfa763c1e360858e330072059e10bad68531159.tar.gz
==> No patches needed for py-pluggy
==> py-pluggy: Executing phase: 'install'
==> py-pluggy: Successfully installed py-pluggy-1.0.0-vrze2gxa77onvs7enpgdh6vicedtckj4
Stage: 1.48s. Install: 11.14s. Post-install: 1.82s. Total: 27.55s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-pluggy-1.0.0-vrze2gxa77onvs7enpgdh6vicedtckj4
==> Installing py-pandas-2.1.2-j4st3gsa5orxghspc4ttkabyfkqjey63 [137/153]
==> No binary for py-pandas-2.1.2-j4st3gsa5orxghspc4ttkabyfkqjey63 found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/52/52897edc2774d2779fbeb6880d2cfb305daa0b1a29c16b91f531a18918a6e0f3.tar.gz
==> No patches needed for py-pandas
==> py-pandas: Executing phase: 'install'
==> py-pandas: Successfully installed py-pandas-2.1.2-j4st3gsa5orxghspc4ttkabyfkqjey63
Stage: 43.39s. Install: 9m 49.33s. Post-install: 1m 6.99s. Total: 11m 55.56s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-pandas-2.1.2-j4st3gsa5orxghspc4ttkabyfkqjey63
==> Installing py-hatchling-1.18.0-wbawzfuex7xrhgr7ipv7ejgadqcxpl2f [138/153]
==> No binary for py-hatchling-1.18.0-wbawzfuex7xrhgr7ipv7ejgadqcxpl2f found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/50/50e99c3110ce0afc3f7bdbadff1c71c17758e476731c27607940cfa6686489ca.tar.gz
==> No patches needed for py-hatchling
==> py-hatchling: Executing phase: 'install'
==> py-hatchling: Successfully installed py-hatchling-1.18.0-wbawzfuex7xrhgr7ipv7ejgadqcxpl2f
Stage: 2.34s. Install: 30.91s. Post-install: 4.02s. Total: 41.85s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-hatchling-1.18.0-wbawzfuex7xrhgr7ipv7ejgadqcxpl2f
==> Installing py-urllib3-2.0.6-nuzdhqpuisgymtzdeq77hbh3656w2sms [139/153]
==> No binary for py-urllib3-2.0.6-nuzdhqpuisgymtzdeq77hbh3656w2sms found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/b1/b19e1a85d206b56d7df1d5e683df4a7725252a964e3993648dd0fb5a1c157564.tar.gz
==> No patches needed for py-urllib3
==> py-urllib3: Executing phase: 'install'
==> py-urllib3: Successfully installed py-urllib3-2.0.6-nuzdhqpuisgymtzdeq77hbh3656w2sms
Stage: 3.66s. Install: 8.59s. Post-install: 2.50s. Total: 18.09s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-urllib3-2.0.6-nuzdhqpuisgymtzdeq77hbh3656w2sms
==> Installing py-requests-2.31.0-qui5e4dffb6wr6vleb5pqxf5zhuyd2xc [140/153]
==> No binary for py-requests-2.31.0-qui5e4dffb6wr6vleb5pqxf5zhuyd2xc found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/94/942c5a758f98d790eaed1a29cb6eefc7ffb0d1cf7af05c3d2791656dbd6ad1e1.tar.gz
==> No patches needed for py-requests
==> py-requests: Executing phase: 'install'
==> py-requests: Successfully installed py-requests-2.31.0-qui5e4dffb6wr6vleb5pqxf5zhuyd2xc
Stage: 1.97s. Install: 20.61s. Post-install: 2.18s. Total: 28.81s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-requests-2.31.0-qui5e4dffb6wr6vleb5pqxf5zhuyd2xc
==> Installing py-requests-oauthlib-1.3.1-665iz7jyvhvzt3juk3r6d724flzfp5n4 [141/153]
==> No binary for py-requests-oauthlib-1.3.1-665iz7jyvhvzt3juk3r6d724flzfp5n4 found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/75/75beac4a47881eeb94d5ea5d6ad31ef88856affe2332b9aafb52c6452ccf0d7a.tar.gz
==> No patches needed for py-requests-oauthlib
==> py-requests-oauthlib: Executing phase: 'install'
==> py-requests-oauthlib: Successfully installed py-requests-oauthlib-1.3.1-665iz7jyvhvzt3juk3r6d724flzfp5n4
Stage: 1.72s. Install: 12.50s. Post-install: 2.37s. Total: 20.15s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-requests-oauthlib-1.3.1-665iz7jyvhvzt3juk3r6d724flzfp5n4
==> Installing py-docker-6.0.1-6t6e357qmyeqy3aujq5fyh6xqjbymtpm [142/153]
==> No binary for py-docker-6.0.1-6t6e357qmyeqy3aujq5fyh6xqjbymtpm found: installing from source
==> Fetching https://spack-llnl-mirror.s3-us-west-2.amazonaws.com/_source-cache/archive/89/896c4282e5c7af5c45e8b683b0b0c33932974fe6e50fc6906a0a83616ab3da97.tar.gz
==> No patches needed for py-docker
==> py-docker: Executing phase: 'install'
==> py-docker: Successfully installed py-docker-6.0.1-6t6e357qmyeqy3aujq5fyh6xqjbymtpm
Stage: 6.79s. Install: 21.78s. Post-install: 3.45s. Total: 35.87s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-docker-6.0.1-6t6e357qmyeqy3aujq5fyh6xqjbymtpm
==> Installing py-google-auth-oauthlib-0.5.2-ydrmfbo6snfnj6gcrwqnvvncognypizx [143/153]
==> No binary for py-google-auth-oauthlib-0.5.2-ydrmfbo6snfnj6gcrwqnvvncognypizx found: installing from source
==> Using cached archive: /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/var/spack/cache/_source-cache/archive/d5/d5e98a71203330699f92a26bc08847a92e8c3b1b8d82a021f1af34164db143ae.tar.gz
==> No patches needed for py-google-auth-oauthlib
==> py-google-auth-oauthlib: Executing phase: 'install'
==> py-google-auth-oauthlib: Successfully installed py-google-auth-oauthlib-0.5.2-ydrmfbo6snfnj6gcrwqnvvncognypizx
Stage: 0.69s. Install: 10.86s. Post-install: 3.11s. Total: 19.09s
[+] /vol0003/rccs-sdt/data/a01008/spack-all-test/env-20240227/spack/opt/spack/linux-rhel8-a64fx/fj-4.10.0/py-google-auth-oauthlib-0.5.2-ydrmfbo6snfnj6gcrwqnvvncognypizx
==> Error: py-alphafold-2.2.4-fx7l3hgstwyjpg5njiutpu5aoinlklcg: Package was not installed
==> Error: Installation request failed. Refer to reported errors for failing package(s).